HD6417727BP100BV Renesas Electronics America, HD6417727BP100BV Datasheet - Page 200

• Manufacturer Part Number: HD6417727BP100BV
• Description: IC SUPERH MPU ROMLESS 240BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727BP100BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-BGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

Section 4 Exception Handling
• TLB invalid exception
• TLB exception/CPU address error in repeat loop
• Initial page write exception
Rev.6.00 Mar. 27, 2009 Page 142 of 1036
REJ09B0254-0600
To speed up TLB miss processing, the offset differs from other exceptions.
⎯ Conditions: Comparison of TLB addresses shows address match but V = 0.
⎯ Operations: The logical address (32 bits) that caused the exception is set in TEA and the
The PC and SR of the instruction that generated the exception are saved in the SPC and SSR,
respectively. If the exception occurred during a read, H'040 is set in EXPEVT; if the exception
occurred during a write, H'060 is set in EXPEVT. The BL, MD, and RB bits in SR are set to 1
and a branch occurs to PC = VBR + H'0100.
⎯ Conditions: TLB miss, TLB invalid or CPU address error in the last several instructions of
⎯ Operations: TEA, PTEH and RC bit in MMUCR are set in the way of the type of
The SR of the instruction that generated the exception are saved in the SSR. But the SPC is not
the PC of the instruction that generated the exception. Repeat loop can not be restarted after
returning from exception handler. In order to complete a repeat loop, ensure not to cause TLB
exceptions or CPU address error in the last several instructions of repeat loop (see section
3.5.6, MMU Exception in Repeat Loop). If the TLB exception or CPU address error occurred
in the last several instructions of repeat loop, H'070 is set in EXPEVT. The BL, MD, and RB
bits in SR are set to 1 and a branch occurs to PC = VBR + H'0100.
⎯ Conditions: A hit occurred to the TLB for a store access, but D = 0.
⎯ Operations: The logical address (32 bits) that caused the exception is set in TEA and the
The PC and SR of the instruction that generated the exception are saved to the SPC and SSR,
respectively. H'080 is set in EXPEVT. The BL, MD, and RB bits in SR are set to 1 and a
branch occurs in PC = VBR + H'0100.
corresponding virtual page number (22 bits) is set in PTEH (31 to 10). The ASID of PTEH
indicates the ASID at the time the exception occurred. The way that generated the
exception is set in the RC bits in MMUCR.
repeat loop (see section 3.5.6, MMU Exception in Repeat Loop)
exception.
This occurs for initial writes to the page registered by the load.
corresponding virtual page number (22 bits) is set in PTEH (31 to 10). The ASID of PTEH
indicates the ASID at the time the exception occurred. The way that generated the
exception is set in the RC bit in MMUCR.