MC9S12NE64VTU Freescale Semiconductor, MC9S12NE64VTU Datasheet - Page 57

• Manufacturer Part Number: MC9S12NE64VTU
• Description: IC MCU 25MHZ ETHERNET/PHY 80TQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12NE64VTU

• Mfg Application Notes: MC9S12NE64 Integrated Ethernet Controller Implementing an Ethernet Interface with the MC9S12NE64 Web Server Development with MC9S12NE64 and Open TCP
• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 38
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.375 V ~ 3.465 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 80-TQFP Exposed Pad, 80-eTQFP, 80-HTQFP, 80-VQFP
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 16 bit
• Operating Supply Voltage: - 0.3 V to + 3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 65 C
• On-chip Adc: 10 bit
• For Use With: EVB9S12NE64E - BOARD EVAL FOR 9S12NE64DEMO9S12NE64E - DEMO BOARD FOR 9S12NE64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

1.2.3.60 PHY_RBIAS — EPHY Bias Control Resistor
Connect a 1.0% external resistor, RBIAS, between PHY_RBIAS pin and PHY_VSSA. This resistor must
be placed as near as possible to the chip pin. Stray capacitance must be kept to less than 10 pF (> 50 pF
may cause instability). No high-speed signals are allowed in the region of RBIAS.
1.2.4
1.2.4.1
External power and ground for I/O drivers. Bypass requirements depend on how heavily the MCU pins are
loaded.
1.2.4.2
External power for internal voltage regulator.
1.2.4.3
Power is supplied to the MCU through VDD and VSS. This 2.5V supply is derived from the internal
voltage regulator. No static load is allowed on these pins. The internal voltage regulator is turned off, if
VDDR/VREGEN is tied to ground.
1.2.4.4
VDDA and VSSA are the power supply and ground input pins for the voltage regulator and the
analog-to-digital converter.
1.2.4.5
Power is supplied to the Ethernet physical transceiver (EPHY) PLLs through PHY_VDDA and
PHY_VSSA. This 2.5V supply is derived from the internal voltage regulator. No static load is allowed on
these pins. The internal voltage regulator is turned off, if VDDR/VREGEN is tied to ground.
1.2.4.6
Power is supplied to the Ethernet physical transceiver (EPHY) receiver through PHY_VDDRX and
PHY_VSSRX. This 2.5V supply is derived from the internal voltage regulator. No static load is allowed
on these pins. The internal voltage regulator is turned off, if VDDR/VREGEN is tied to ground.
1.2.4.7
External power is supplied to the Ethernet physical transceiver (EPHY) transmitter through PHY_VDDTX
and PHY_VSSTX. This 2.5 V supply is derived from the internal voltage regulator. No static load is
allowed on these pins. The internal voltage regulator is turned off, if V
Freescale Semiconductor
Power Supply Pins
V
Voltage Regulator
V
V
V
PHY_VDDA, PHY_VSSA — Power Supply Pins for EPHY Analog
PHY_VDDRX, PHY_VSSRX — Power Supply Pins for EPHY Receiver
PHY_VDDTX, PHY_VSSTX — Power Supply Pins for EPHY Transmitter
DDX1
DDR
DD1
DDA
, V
/V
, V
, V
REGEN
DD2
SSA
DDX2
, V
— Power Supply Pins for ATD and VREG_PHY
, V
SS1
— Power Pin for Internal Voltage Regulator
SSX1
, V
SS2
MC9S12NE64 Data Sheet, Rev 1.0
, V
SSX2
— Core Power Pins
— Power & Ground Pins for I/O & Internal
DDR
/V
REGEN
is tied to ground.
Signal Description
57