MC9S12NE64VTU Freescale Semiconductor, MC9S12NE64VTU Datasheet - Page 545

• Manufacturer Part Number: MC9S12NE64VTU
• Description: IC MCU 25MHZ ETHERNET/PHY 80TQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12NE64VTU

• Mfg Application Notes: MC9S12NE64 Integrated Ethernet Controller Implementing an Ethernet Interface with the MC9S12NE64 Web Server Development with MC9S12NE64 and Open TCP
• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 38
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.375 V ~ 3.465 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 80-TQFP Exposed Pad, 80-eTQFP, 80-HTQFP, 80-VQFP
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 16 bit
• Operating Supply Voltage: - 0.3 V to + 3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 65 C
• On-chip Adc: 10 bit
• For Use With: EVB9S12NE64E - BOARD EVAL FOR 9S12NE64DEMO9S12NE64E - DEMO BOARD FOR 9S12NE64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

B.1.2
A 3.3-V power supply is required. This power supply shall be compatible with Table A-7. Supply
Current Characteristics.
B.1.3
For basic operation of the MC9S12NE64, a 25-MHz crystal is required to provide the clock input to the
integrated PHY. The crystal must connect to the MC9S12NE64 in a Pierce configuration by the XTAL and
EXTAL pins as shown in Figure B-1.
In addition to providing a 25-MHz crystal input, to operate at 100 Mbps, the internal bus clock must be
configured as shown in the EPHY electrical characteristics.
B.1.4
Figure B-2 provides a close-up view of the EPHY pin connections to a high-speed LAN magnetics
isolation module and RJ45 Ethernet connector.
B.1.5
The EPHY can be configuring by software to drive indicator pins (PTL[5:0]) automatically by setting the
LEDEN bit of the EPHY EPHYCTL0 register. When LEDEN = 1, PTL[5:0] pins are dedicated to the
EPHY.
Freescale Semiconductor
Power Supply Notes
Clocking Notes
EPHY Notes
EPHY LED Indicator Notes
Figure B-2. Ethernet Interface Circuitry
MC9S12NE64 Data Sheet, Rev. 1.1
Introduction
545