AT32UC3L-EK Atmel, AT32UC3L-EK Datasheet - Page 763

• Manufacturer Part Number: AT32UC3L-EK
• Description: KIT EVAL AVR32 UC3 MCU
• Manufacturer: Atmel
• Type: MCUr

Specifications of AT32UC3L-EK

• Contents: *
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Core Sub-architecture: UC3L
• Kit Contents: Board
• Features: USB / Battery Powered, Board Controller / Bootloader
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Tool Type: Starter Kit
• Cpu Core: AVR 8
• Data Bus Width: 8 bit
• Processor Series: AT32
• Processor To Be Evaluated: AT32UC3L064
• Interface Type: USB, Capacitive Touch
• For Use With/related Products: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

31.5.4
31.5.4.1
31.5.4.2
32099F–11/2010
JTAG Data Registers
Device Identification Register
Reset Register
The following device specific registers can be selected as JTAG scan chain depending on the
instruction loaded in the JTAG Instruction Register. Additional registers exist, but are implicitly
described in the functional description of the relevant instructions.
The Device Identification Register contains a unique identifier for each product. The register is
selected by the IDCODE instruction, which is the default instruction after a JTAG reset.
Device specific ID codes
The different device configurations have different JTAG ID codes, as shown in
Note that if the flash controller is statically reset, the ID code will be undefined
Table 31-29. Device and JTAG ID
The reset register is selected by the AVR_RESET instruction and contains one bit for each reset
domain in the device. Setting each bit to one will keep that domain reset until the bit is cleared.
Bit
Device ID
Revision
Part Number
Manufacturer ID
Device Name
AT32UC3L064
AT32UC3L032
AT32UC3L016
System
31
MSB
Revision
4 bits
This is a 4 bit number identifying the revision of the component.
Rev A = 0x0, B = 0x1, etc.
The part number is a 16 bit code identifying the component.
The Manufacturer ID is a 11 bit code identifying the manufacturer.
The JTAG manufacturer ID for ATMEL is 0x01F.
Resets the whole chip, except the JTAG itself.
JTAG ID Code (R is the revision number)
0xR203003F
0xR203403F
0xR203803F
28
27
Part Number
Bit
Reset
domain
16 bits
12
11
System
0
AT32UC3L016/32/64
Manufacturer ID
11 bits
.
1
Table
LSB
1 bit
31-29.
0
1
763