attiny167-esxz ATMEL Corporation, attiny167-esxz Datasheet - Page 192

• Manufacturer Part Number: attiny167-esxz
• Description: 8-bit Avr 8-bit Microcontroller Microcontroller With 16k Bytes In-system Programmable Flash And Lin Controller
• Manufacturer: ATMEL Corporation

17.8
192
ADC Conversion Result
ATtiny167
Figure 17-11. Integral Non-linearity (INL)
•
Figure 17-12. Differential Non-linearity (DNL)
•
•
After the conversion is complete (ADIF is high), the conversion result can be found in the ADC
Result Registers (ADCL, ADCH). The form of the conversion result depends on the type of the
conversion as there are three types of conversions: single ended conversion, unipolar differen-
tial conversion and bipolar differential conversion.
Differential Non-linearity (DNL): The maximum deviation of the actual code width (the
interval between two adjacent transitions) from the ideal code width (1 LSB). Ideal value: 0
LSB.
Quantization Error: Due to the quantization of the input voltage into a finite number of codes,
a range of input voltages (1 LSB wide) will code to the same value. Always ± 0.5 LSB.
Absolute Accuracy: The maximum deviation of an actual (unadjusted) transition compared
to an ideal transition for any code. This is the compound effect of offset, gain error,
differential error, non-linearity, and quantization error. Ideal value: ± 0.5 LSB.
Output Code
Output Code
0x000
0x3FF
0
1 LSB
V
REF
V
REF
Input Voltage
Input Voltage
Ideal ADC
Actual ADC
7728A–AUTO–07/08