HD64F7047F50 Renesas Electronics America, HD64F7047F50 Datasheet - Page 264

• Manufacturer Part Number: HD64F7047F50
• Description: IC SUPERH MCU FLASH 256K 100QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

10.4.8
In the complementary PWM mode, three-phase output of non-overlapping positive and negative
PWM waveforms can be obtained by combining channels 3 and 4.
In complementary PWM mode, TIOC3B, TIOC3D, TIOC4A, TIOC4B, TIOC4C, and TIOC4D
pins function as PWM output pins, the TIOC3A pin can be set for toggle output synchronized with
the PWM period. TCNT_3 and TCNT_4 function as increment/decrement counters.
Table 10.39 shows the PWM output pins used. Table 10.40 shows the settings of the registers
used.
A function to directly cut off the PWM output by using an external signal is supported as a port
function.
Table 10.39 Output Pins for Complementary PWM Mode
Note:
Rev. 2.00, 09/04, page 222 of 720
Channel
3
4
*
Complementary PWM Mode
Avoid setting the TIOC3C pin as a timer I/O pin in the complementary PWM mode.
Output Pin
TIOC3A
TIOC3B
TIOC3C
TIOC3D
TIOC4A
TIOC4B
TIOC4C
TIOC4D
Description
Toggle output synchronized with PWM period (or I/O port)
PWM output pin 1
I/O port*
PWM output pin 1' (non-overlapping negative-phase
waveform of PWM output 1)
PWM output pin 2
PWM output pin 3
PWM output pin 2' (non-overlapping negative-phase
waveform of PWM output 2)
PWM output pin 3' (non-overlapping negative-phase
waveform of PWM output 3)