DF2505FC26V Renesas Electronics America, DF2505FC26V Datasheet - Page 85

• Manufacturer Part Number: DF2505FC26V
• Description: IC H8S/2505 MCU FLASH 144QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2500r

Specifications of DF2505FC26V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 26MHz
• Connectivity: I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 104
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

2.4.5
Reset exception handling loads the CPU's program counter (PC) from the vector table, clears the
trace bit in EXR to 0, and sets the interrupt mask bits in CCR and EXR to 1. The other CCR bits
and the general registers are not initialized. In particular, the stack pointer (ER7) is not initialized.
The stack pointer should therefore be initialized by an MOV.L instruction executed immediately
after a reset.
Bit
2
1
0
Bit Name
Z
V
C
Initial Values of CPU Registers
Initial Value
Undefined
Undefined
Undefined
R/W
R/W
R/W
R/W
Description
Zero Flag
Set to 1 to indicate zero data, and cleared to 0 to
indicate non-zero data.
Overflow Flag
Set to 1 when an arithmetic overflow occurs, and
cleared to 0 at other times.
Carry Flag
Set to 1 when a carry occurs, and cleared to 0
otherwise. Used by:
•
•
•
The carry flag is also used as a bit accumulator by
bit manipulation instructions.
Add instructions, to indicate a carry
Subtract instructions, to indicate a borrow
Shift and rotate instructions, to indicate a carry
Rev. 6.00 Sep. 24, 2009 Page 37 of 928
REJ09B0099-0600
Section 2 CPU