DF2505FC26V Renesas Electronics America, DF2505FC26V Datasheet - Page 451

• Manufacturer Part Number: DF2505FC26V
• Description: IC H8S/2505 MCU FLASH 144QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2500r

Specifications of DF2505FC26V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 26MHz
• Connectivity: I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 104
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

• Smart Card Interface Mode (When SMIF in SCMR Is 1)
Bit
7
6
Bit Name
GM
BLK
Initial
Value
0
0
R/W
R/W
R/W
0: Normal smart card interface mode operation (initial
0: Normal smart card interface mode operation (initial
Description
GS Mode
Setting this bit to 1 allows GSM mode operation. In GSM
mode, the TEND set timing is put forward to 11.0 etu
from the start and the clock output control function is
appended. For details, see section 13.7.8, Clock Output
Control.
•
•
1: GSM mode operation in smart card interface mode
•
•
Setting this bit to 1 allows block transfer mode operation.
For details, see section 13.7.3, Block Transfer Mode.
•
•
•
1: Operation in block transfer mode
•
•
•
value)
value)
The TEND flag is generated 12.5 etu (11.5 etu in the
block transfer mode) after the beginning of the start
bit.
Clock output on/off control only
The TEND flag is generated 11.0 etu after the
beginning of the start bit.
In addition to clock output on/off control, high/low
fixed control is supported (set using SCR).
Error signal transmission, detection, and automatic
data retransmission are performed.
The TXI interrupt is generated by the TEND flag.
The TEND flag is set 12.5 etu (11.0 etu in the GSM
mode) after transmission starts.
Error signal transmission, detection, and automatic
data retransmission are not performed.
The TXI interrupt is generated by the TDRE flag.
The TEND flag is set 11.5 etu (11.0 etu in the GSM
mode) after transmission starts.
Section 13 Serial Communication Interface (SCI)
Rev. 6.00 Sep. 24, 2009 Page 403 of 928
REJ09B0099-0600