C8051F131R Silicon Labs, C8051F131R Datasheet - Page 171

• Manufacturer Part Number: C8051F131R
• Description: 8-bit Microcontrollers - MCU 128kB 100MIPS 8448B RAM
• Manufacturer: Silicon Labs

Specifications of C8051F131R

• Product Category: 8-bit Microcontrollers - MCU
• Core: 8051
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 100 MHz
• Program Memory Size: 128 KB
• Data Ram Size: 8.25 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 2.7 V to 3.6 V
• Package / Case: TQFP-64
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 9
• Data Rom Size: 64 KB
• Interface Type: I2C, SMBus, SPI, UART
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 32
• Number Of Timers: 16 bit
• Processor Series: C8051
• Program Memory Type: Flash
• Factory Pack Quantity: 500
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 3 V

Bits 7 – 4: UNUSED: Read = 0000b, Write = don’t care.
Bit 3:
Bit 2:
Bit 1:
Bit 0:
*Note: The contents of this register should not be changed by software during the first two MAC0 pipeline stages.
Bits 7 – 0: High Byte (bits 15 – 8) of MAC0 A Register.
Bit7
Bit7
R
R
-
MAC0HO: Hard Overflow Flag.
This bit is set to ‘1’ whenever an overflow out of the MAC0OVR register occurs during a
MAC operation (i.e. when MAC0OVR changes from 0x7F to 0x80 or from 0x80 to 0x7F).
The hard overflow flag must be cleared in software by directly writing it to ‘0’, or by resetting
the MAC logic using the MAC0CA bit in register MAC0CF.
MAC0Z: Zero Flag.
This bit is set to ‘1’ if a MAC0 operation results in an Accumulator value of zero. If the result
is non-zero, this bit will be cleared to ‘0’.
MAC0SO: Soft Overflow Flag.
This bit is set to ‘1’ when a MAC operation causes an overflow into the sign bit (bit 31) of the
MAC0 Accumulator. If the overflow condition is corrected after a subsequent MAC opera-
tion, this bit is cleared to ‘0’.
MAC0N: Negative Flag.
If the MAC Accumulator result is negative, this bit will be set to ‘1’. If the result is positive or
zero, this flag will be cleared to ‘0’.
Bit6
Bit6
R
R
-
SFR Definition 12.3. MAC0AH: MAC0 A High Byte
SFR Definition 12.2. MAC0STA: MAC0 Status
Bit5
Bit5
R
R
-
Bit4
Bit4
R
R
-
MAC0HO
Rev. 1.4
R/W
Bit3
Bit3
R
C8051F120/1/2/3/4/5/6/7
MAC0Z
R/W
Bit2
Bit2
R
MAC0SO
C8051F130/1/2/3
R/W
Bit1
Bit1
R
SFR Address: 0xC0
SFR Address: 0xC2
MAC0N 00000100
SFR Page: 3
SFR Page: 3
R/W
Bit0
Bit0
R
Addressable
00000000
Reset Value
Reset Value
Bit
171