SC28L201A1DGG,118 NXP Semiconductors, SC28L201A1DGG,118 Datasheet - Page 72

• Manufacturer Part Number: SC28L201A1DGG,118
• Description: IC UART W/FIFO 48-TSSOP
• Manufacturer: NXP Semiconductors
• Series: IMPACTr

Specifications of SC28L201A1DGG,118

• Features: False-start Bit Detection
• Number Of Channels: 2, DUART
• Fifo's: 256 Byte
• Voltage - Supply: 3.3V, 5V
• With Parallel Port: Yes
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 48-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935277824118; SC28L201A1DGG-T; SC28L201A1DGG-T

Philips Semiconductors
9397 750 13138
Product data sheet
8.5.7 Global Interrupting Type Register (GITR)
8.5.8 Global RxFIFO register (GRxFIFO)
8.5.9 Global TxFIFO register (GTxFIFO)
A register associated with the interrupting channel as defined in the CIR. It contains the
type of interrupt code for all interrupts.
Table 52:
The RxFIFO of the channel indicated in the CIR channel field. Undefined when the CIR
interrupt context is not a receiver interrupt.
Table 53:
The TxFIFO of the channel indicated in the CIR channel field. Undefined when the CIR
interrupt context is not a transmitter interrupt. Writing to the GTxFIFO when the current
interrupt is not a transmitter event may result in the characters being transmitted on a
different channel than intended.
Table 54:
Bit
7:6
5
4:3
2:0
Bit
7:0
Bit
7:0
Symbol
Symbol
Symbol
GITR - Global Interrupting Type Register (address 0x72) bit description
GRxFIFO - Global RxFIFO register (address 0x73) bit description
GTxFIFO - Global TxFIFO register (address 0x73) bit description
Description
Receiver interrupt
Transmitter interrupt
Reserved. Read 0x00.
Other types
Description
8 data bits of RxFIFO. MSBs set to ‘0’ for 7, 6, 5 bit data.
Description
8 data bits of TxFIFO. MSBs not used for 7, 6, 5 bit data.
Rev. 01 — 31 October 2005
0x = not receiver
10 = with receive errors
11 = without receive errors
0 = not transmitter
1 = transmitter interrupt
000 = not ‘other’ type
001 = change of state
010 = address recognition event
011 = Xon/Xoff status
100 = Rx watchdog
101 = Break change
110 = Counter/Timer
111 = Rx Loopback Error
3.3 V, 5 V UART, 3.125 Mbit/s, with 256-byte FIFO
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
SC28L201
72 of 110