DK-DEV-2AGX125N Altera, DK-DEV-2AGX125N Datasheet - Page 12

• Manufacturer Part Number: DK-DEV-2AGX125N
• Description: KIT DEV ARRIA II GX FPGA 2AGX125
• Manufacturer: Altera
• Series: Arria II GXr
• Type: FPGAr

Specifications of DK-DEV-2AGX125N

• Contents: Board, Cables, CD, DVD, Power Supply
• Silicon Manufacturer: Altera
• Core Architecture: FPGA
• Core Sub-architecture: Arria
• Silicon Core Number: EP2
• Silicon Family Name: Arria II GX
• Rohs Compliant: Yes
• For Use With/related Products: EP2AGX125EF35
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 544-2600

2–4
Table 2–1. Arria II GX FPGA Development Board Components (Part 3 of 3)
Arria II GX FPGA Development Board Reference Manual
PB5
Memory Devices
J7
U13
U22
U23
Communication Ports
J14
J2
J1
J6
J8
Display Ports
J3
Power Supply
J14
J4
SW1
Board Reference
Load image push-button
switch
DDR2 SODIMM
DDR3 x16 memory
SSRAM x36 memory
Flash x16 memory
PCI Express edge connector
HSMC port A
HSMC port B
USB type-B connector
Gigabit Ethernet
Character LCD
PCI Express edge connector
DC input jack
Power switch
Type
Load image from flash memory to the FGPA based on the
configuration LED setting.
DDR2 x64 SODIMM 200-pin connector and is populated with a
1-Gbyte memory module.
Independent 16-bit 128-Mbyte DDR3 memory port.
Standard synchronous RAM which makes a 36-bit 2-Mbyte SRAM
port.
Synchronous burst mode flash device which provides a 16-bit
64-Mbyte non-volatile memory port.
Gold-plated edge fingers for up to ×8 signaling in Gen1 mode.
Provides four transceiver channels and 80 CMOS or 17 LVDS channels
per the HSMC specification.
Provides four transceiver channels and 78 CMOS channels per the
HSMC specification (only populated when a EP2AGX260 FPGA device
is installed).
USB interface for programming the FPGA through embedded
USB-Blaster JTAG via a type-B USB cable.
RJ-45 connector which provides a 10/100/1000 Ethernet connection
via a Marvell 88E1111 PHY and the FPGA-based Altera Triple Speed
Ethernet MegaCore function in RGMII mode.
Connector which interfaces to the 16 character × 2 line LCD module
along with two standoffs at MTH7 and MTH8.
Interfaces to a PCI Express root port such as an appropriate PC
motherboard.
Accepts a 14-V – 20-V DC power supply. Do not use this input jack
while the board is plugged into a PCI Express slot.
Switch to power on or off the board when the DC input jack supplies
power.
Description
February 2011 Altera Corporation
Chapter 2: Board Components
Board Overview