S1D13505 Epson Electronics America, Inc., S1D13505 Datasheet - Page 399

• Manufacturer Part Number: S1D13505
• Description: LCD Controller
• Manufacturer: Epson Electronics America, Inc.

Epson Research and Development
Vancouver Design Center
6.3 DRAM Support
6.4 Decode Logic
6.5 Clock Input Support
6.6 Monochrome LCD Panel Support
6.7 Color Passive LCD Panel Support
S5U13505B00C Rev. 1.0 ISA Bus Evaluation Board User Manual
Issue Date: 01/02/05
The S1D13505 supports 256K x 16 as well as 1M x 16 FPM/EDO-DRAM in symmetrical and
asymmetrical formats.
The S5U13505B00C board supports a 5.0V 1M x 16 symmetrical EDO-DRAM (42-pin SOJ
package). This provides a 2M byte display buffer.
This board utilizes the MIPS/ISA Interface of the S1D13505 (see the S1D13505 Hardware
Functional Specification, document number X23A-A-001-xx).
All required decode logic is provided through a 22V10 PAL (U4, socketed).
The S1D13505 supports up to a 40.0Mhz input clock frequency. A 40.0MHz oscillator (U2,
socketed) is provided on the S5U13505 board as the clock (CLKI) source.
The S1D13505 supports 4 and 8-bit, dual and single, monochrome passive LCD panels. All
necessary signals are provided on the 40-pin ribbon cable header J6. The interface signals on the
cable are alternated with grounds to reduce crosstalk and noise.
Refer to Table 3-1 “LCD Signal Connector (J6)” on page 9 for connection information.
The S1D13505 directly supports 4, 8 and 16-bit, dual and single, color passive LCD panels. All the
necessary signals are provided on the 40-pin ribbon cable header J6. The interface signals on the
cable are alternated with grounds to reduce crosstalk and noise.
Refer to Table 3-1 “LCD Signal Connector (J6)” on page 9 for connection information.
X23A-G-004-05
S1D13505
Page 15