TMP86xy92DMG Toshiba, TMP86xy92DMG Datasheet - Page 42

• Manufacturer Part Number: TMP86xy92DMG
• Manufacturer: Toshiba

Specifications of TMP86xy92DMG

• Package: SSOP30
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 16
• Ram Size: 512
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 6
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 1
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 24
• Power Supply (v): 4 to 5.5

2.2
System Clock Controller
Example :Switching from the SLOW1 mode to the NORMAL2 mode (fc = 16 MHz, warm-up time is 4.0 ms).
PINTTC4:
VINTTC4:
(2)
(Warm up) has been taken by the timer/counter (TC4,TC3), clear SYSCR2<SYSCK> to switch the
main system clock to the high-frequency clock.
the operation mode is started from NORMAL1 mode.
Note:After SYSCR2<SYSCK> is cleared to 0, instructions are executed continuously by the low-fre-
Switching from SLOW1 mode to NORMAL2 mode
First, set SYSCR2<XEN> to turn on the high-frequency oscillation. When time for stabilization
SLOW mode can also be released by inputting low level on the RESET pin. After releasing reset,
SET
LD
LD
LD
DI
SET
EI
SET
:
CLR
CLR
RETI
:
DW
quency clock during synchronization period for high-frequency and low-frequency clocks.
High-frequency clock
Low-frequency clock
Main system clock
SYSCK
(SYSCR2). 7
(TC3CR), 63H
(TC4CR), 05H
( TTREG4), 0F8H
(EIRH). 7
(TC4CR). 3
(TC4CR). 3
(SYSCR2). 5
PINTTC4
Page 28
; SYSCR2<XEN> ← 1 (Starts high-frequency oscillation)
; Sets mode for TC4, 3 (16-bit mode, fc for source)
; Sets warming-up counter mode
; Sets warm-up time
; IMF ← 0
; Enables INTTC4
; IMF ← 1
; Starts TC4, 3
; Stops TC4, 3
; SYSCR2<SYSCK> ← 0
; (Switches the main system clock to the high-frequency clock)
; INTTC4 vector table
TMP86FH92DMG