TMP86xy92DMG Toshiba, TMP86xy92DMG Datasheet - Page 208

• Manufacturer Part Number: TMP86xy92DMG
• Manufacturer: Toshiba

Specifications of TMP86xy92DMG

• Package: SSOP30
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 16
• Ram Size: 512
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 6
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 1
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 24
• Power Supply (v): 4 to 5.5

19.6
Operation Mode
Table 19-7 Flash Memory Erasing Mode
BOOT
19.6.1
ROM
Note 1: “xxH × 3” indicates that the device enters the halt condition after transmitting 3 bytes of xxh.
Note 2: Refer to "19.13 Specifying the Erasure Area".
Note 3: Refer to "19.8 Checksum (SUM)".
Note 4: Refer to "19.10 Passwords".
Note 5: Do not transmit the password string for a blank product.
Note 6: When a password error occurs, TMP86FH92DMG stops UART communication and enters the halt mode. Therefore, when
Note 7: If an error occurs during transfer of a password address or a password string, TMP86FH92DMG stops UART communi-
1st byte
2nd byte
3rd byte
4th byte
5th byte
6th byte
7th byte
8th byte
9th byte
10th byte
11th byte
12th byte
13th byte
14th byte
15th byte
:
m’th byte
n’th - 2 byte
n’th - 1 byte
n’th byte
n’th + 1 byte
Table 19-7 shows the flash memory erasing mode.
Transfer Byte
Flash Memory Erasing Mode (Operating command: F0H)
a password error occurs, initialize TMP86FH92DMG by the RESET pin and reactivate the serial PROM mode.
cation and enters the halt condition. Therefore, when a password error occurs, initialize TMP86FH92DMG by the
RESET pin and reactivate the serial PROM mode.
Matching data (5AH)
-
Baud rate change data (Table 19-4)
-
Operation command data (F0H)
-
Password count storage address bit 15
to 08 (Note 4, 5)
Password count storage address bit 07
to 00 (Note 4, 5)
Password comparison start address bit
15 to 08 (Note 4, 5)
Password comparison start address bit
07 to 00 (Note 4, 5)
Password string (Note 4, 5)
-
Erase area specification (Note 2)
-
-
(Wait for the next operation command
data)
Transfer Data from the External
Controller to TMP86FH92DMG
Page 194
9600 bps
9600 bps
9600 bps
9600 bps
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Modified baud rate
Baud Rate
- (Automatic baud rate adjustment)
OK: Echo back data (5AH)
Error: No data transmitted
-
OK: Echo back data
Error: A1H × 3, A3H × 3, 62H × 3 (Note 1)
-
OK: Echo back data (F0H)
Error: A1H × 3, A3H × 3, 63H × 3 (Note 1)
-
OK: Nothing transmitted
Error: Nothing transmitted
-
OK: Nothing transmitted
Error: Nothing transmitted
-
OK: Nothing transmitted
Error: Nothing transmitted
-
OK: Nothing transmitted
Error: Nothing transmitted
-
OK: Nothing transmitted
Error: Nothing transmitted
-
OK: Checksum (Upper byte) (Note 3)
Error: Nothing transmitted
OK: Checksum (Lower byte) (Note 3)
Error: Nothing transmitted
-
Transfer Data from TMP86FH92DMG to
the External Controller
TMP86FH92DMG