LAN9311-NZW Standard Microsystem (Smsc), LAN9311-NZW Datasheet - Page 456

• Manufacturer Part Number: LAN9311-NZW
• Description: Ethernet Switch 2-Port 10Mbps/100Mbps 128-Pin XVTQFP
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

.
Revision 1.7 (06-29-10)
Notes:
1. All dimensions are in millimeters unless otherwise noted.
2. Dimensions b & c apply to the flat section of the lead foot between 0.10 and 0.25mm from the lead tip. The
3. Dimensions D1 and E1 do not include mold protrusions. Maximum allowed protrusion is 0.25mm per side. D1
4. The pin 1 identifier may vary, but is always located within the zone indicated
base metal is exposed at the lead tip.
and E1 are maximum plastic body size dimensions including mold mismatch.
Figure 16.2 LAN9311 128-VTQFP Recommended PCB Land Pattern
DATASHEET
456
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
SMSC LAN9311/LAN9311i
Datasheet