LAN9311-NZW Standard Microsystem (Smsc), LAN9311-NZW Datasheet - Page 284

• Manufacturer Part Number: LAN9311-NZW
• Description: Ethernet Switch 2-Port 10Mbps/100Mbps 128-Pin XVTQFP
• Manufacturer: Standard Microsystem (Smsc)

Specifications of LAN9311-NZW

• Package: 128XVTQFP
• Phy/transceiver Interface: MII
• Number Of Primary Switch Ports: 2
• Maximum Data Rate: 100 Mbps
• Internal Memory Buffer Size: 32 KB
• Vlan Support: Yes
• Power Supply Type: Analog
• Minimum Single Supply Voltage: 3 V
• Maximum Single Supply Voltage: 3.6 V
• Maximum Supply Current: 0.295 A
• Maximum Power Dissipation: 1070 mW

Revision 1.7 (06-29-10)
14.3.10
31:16
BITS
15:0
RESERVED
VLAN2 Tag Identifier (VTI2)
This field contains the VLAN Tag used to identify VLAN2 frames. This field
is compared with the 13th and 14th bytes of the incoming frames for VLAN2
frame detection.
Note:
Host MAC VLAN2 Tag Register (HMAC_VLAN2)
This read/write register contains the VLAN tag field to identify VLAN2 frames. When a VLAN2 frame
is detected, the legal frame length is increased from 1518 bytes to 1538 bytes. Refer to
"Virtual Local Area Network (VLAN) Support," on page 114
If used, this register is typically set to the standard VLAN value of
8100h. If both VLAN1 and VLAN2 Tag Identifiers are used, they
should be unique. If both are set to the same value, VLAN1 is
given higher precedence and the maximum legal frame length is
set to 1522.
Offset:
Ah
DESCRIPTION
DATASHEET
284
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
for additional information.
32 bits
TYPE
R/W
SMSC LAN9311/LAN9311i
RO
DEFAULT
Section 9.3,
FFFFh
Datasheet
-