S9S12XS128J1MAL Freescale Semiconductor, S9S12XS128J1MAL Datasheet - Page 265

• Manufacturer Part Number: S9S12XS128J1MAL
• Description: IC MCU 16BIT 128KB FLSH 112LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S9S12XS128J1MAL

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 8K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 112-LQFP
• Processor Series: S12XS
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 12
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: DEMO9S12XSFAME, EVB9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 9
Pierce Oscillator (S12XOSCLCPV2)
9.1
The Pierce oscillator (XOSC) module provides a robust, low-noise and low-power clock source. The
module will be operated from the V
of external components. It is designed for optimal start-up margin with typical crystal oscillators.
9.1.1
The XOSC will contain circuitry to dynamically control current gain in the output amplitude. This ensures
a signal with low harmonic distortion, low power and good noise immunity.
9.1.2
Two modes of operation exist:
The oscillator mode selection is described in the Device Overview section, subsection Oscillator
Configuration.
Freescale Semiconductor
Revision
Number
V01.05
V02.00
•
•
•
•
•
•
•
1. Loop controlled Pierce (LCP) oscillator
2. External square wave mode featuring also full swing Pierce (FSP) without internal bias resistor
High noise immunity due to input hysteresis
Low RF emissions with peak-to-peak swing limited dynamically
Transconductance (gm) sized for optimum start-up margin for typical oscillators
Dynamic gain control eliminates the need for external current limiting resistor
Integrated resistor eliminates the need for external bias resistor in loop controlled Pierce mode.
Low power consumption:
— Operates from 1.8 V (nominal) supply
— Amplitude control limits power
Clock monitor
Introduction
Features
Modes of Operation
04 Aug 2006
19 Jul 2006
Revision
Date
Sections
Affected
S12XS Family Reference Manual, Rev. 1.11
DDPLL
Table 9-1. Revision History
- All xclks info was removed
- Incremented revision to match the design system spec revision
supply rail (1.8 V nominal) and require the minimum number
Description of Changes
265