TMP91xy16FG Toshiba, TMP91xy16FG Datasheet - Page 37

• Manufacturer Part Number: TMP91xy16FG
• Manufacturer: Toshiba

Specifications of TMP91xy16FG

• Package: LQFP100
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: Ramless
• Architecture: 16-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 1
• I2c/sio Bus Channels: -
• (s)dram Controller: 1
• Adc 10-bit Channel: -
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: -
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 31
• Power Supply Voltage(v): 2.7 to 3.6

Example:
Note: When different modes are used before and after STOP mode as the above mentioned,
operates after releasing due to NMI.
The STOP mode is entered when the low frequency operates, and high-frequency
Address
8FFDH
9000H
9002H
9005H
9006H
there is possible to release the HALT mode without changing the operation mode by
acceptance of the halt release interrupt request during execution of HALT instruction
(during 6 state). In the system which accepts the interrupts during execution HALT
instruction, set the same operation mode before and after the STOP mode.
NMI
SYSCR0
SYSCR1
SYSCR2
EQU
EQU
EQU
LD
LD
LD
HALT
LD
00E0H
00E1H
00E2H
(SYSCR1), 08H
(SYSCR2), X − 1001X1B
(SYSCR0), 011000 − − B
XX, XX
91C016-35
; f
; Sets warm-up time to 2
; Operates high frequency after released.
SYS
− : No change
= fs/2
NMI interrupt routine
Clears and starts hit
14
(High frequency)
/f
warm-up timer
OSCH
RETI
End
TMP91C016
2008-02-20