TMP91xy16FG Toshiba, TMP91xy16FG Datasheet - Page 127

• Manufacturer Part Number: TMP91xy16FG
• Manufacturer: Toshiba

Specifications of TMP91xy16FG

• Package: LQFP100
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: Ramless
• Architecture: 16-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 1
• I2c/sio Bus Channels: -
• (s)dram Controller: 1
• Adc 10-bit Channel: -
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: -
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 31
• Power Supply Voltage(v): 2.7 to 3.6

ROM and
to bank register of LOCAL2 area upper 3-bit address of jumping point.
actually jump to physical 2000000H to 3FFFFFH address. When return to common area, it
can only jump to E00000H to FFFFFFH without writing to bank register of LOCAL2 area.
conflict with is possible. When two kinds or more logical addresses to show common area
exist, management of bank is confused. We recommends not to use. The bank setting, bank
address and common address conflict with.
time setting. It needs to write to bank register of LOCAL1 area upper 3-bit address of
jumping point. After setting BANK4, jumping 400000H to 5FFFFFH address: Logical
LOCAL1 address, actually jump to physical 8000000H to 9FFFFFH address.
when moves from a bank to a bank. In other words, it must write to bank register only in
common area. And it is prohibit to write the bank register in bank area. If it modifies the
bank register’s data in bank area, program run-away.
At Figure 3.8.7, it shows example of program jump.
In the same way with before example, two dot line squares show each
After setting BANK1, jumping C00000H to DFFFFFH address: Logical LOCAL2 address,
By a way of setting of bank register, the setting that bank address and common address
When it jump to one memory from other different memory, it can set same as the last
It is a mark paid attention to here, it needs to go by way of common area by all means
CS1
’s option ROM. Program start from E00000H common address, firstly, write
91C016-125
CS2
TMP91C016
2008-02-20
’s program