MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 73

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Hardware Management—MPCBL0050
September 2007
Order Number: 318146-001
Readable Value/Offsets
Readable value indicates the type of value returned for threshold and other non-
discrete type sensors. Readable offsets indicates the offsets for discrete sensors that
are readable via the Get Sensor Reading command. Possible values:
Rearm Sensors
The “rearm” is a request for the event status for a sensor to be rechecked and updated
upon a transition between good and bad states. Rearming the sensors can be done
manually or automatically. This column indicates the type supported by the sensor. The
following abbreviations are used in the comment column of
sensor:
Standby
Some sensors operate on standby power. These sensors may be accessed and/or
generate events when the payload power is off, but DC power is present.
Polling Time
The polling time is the interval time in seconds that the IPMC controller reads the
sensor to determine the value of the sensor. For example, if the polling time is 5
seconds, the value of that sensor is read every 5 seconds and compared against the
Sensor Device Record (SDR) thresholds. If the sensor value exceeds the threshold
limits, then a SEL event is generated. Some sensors generate events asynchronously
and do not need to be polled. Typically, only analog sensors require polling.
Managing Device
The managing device is the hardware device that a sensor is connected to.
• “-”: No events generated
• Analog: Indicates the analog value of sensor can be read.
• yes: Indicates that discrete offset can be read
• “-”: Indicates that this is event only sensor/offset and cannot be read
• A: Auto rearm
• M: Manual rearm
• “-” marks sensors that cannot be accessed on standby power
• “stby” marks sensors that can be accessed on standby power
Intel NetStructure
®
MPCBL0050 Single Board Computer
Table 28
Technical Product Specification
to describe a
73