MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 176

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

9.8.2.3
9.8.2.4
Note:
9.8.2.5
Intel NetStructure
Technical Product Specification
176
®
Starting an SOL Session
Before starting an SOL session, first make sure you can
On the client blade, execute this command:
If the SOL session is activated successfully, the following message is displayed:
Press enter and you should see the target output on the console.
If the SOL session does not activate, run this command to see how ipmitool is
configured:
Checking SOL Configuration
To check the SOL configuration, the following command can be issued.
This requires ipmitool to be installed on the SOL target blade also.
Use
Ethernet port is connected to Ethernet switch located in Slot #7 on the MPCH0001
chassis) and
(Ethernet switch located in Slot #8).
root@DRBlade14:/usr/bin# ipmitool lan print 1
Set in Progress
Auth Type Support
Auth Type Enable
IP Address Source
IP Address
Subnet Mask
MAC Address
SNMP Community String
IP Header
BMC ARP Control
Gratituous ARP Intrvl
Default Gateway IP
Default Gateway MAC
Backup Gateway IP
Backup Gateway MAC
RMCP+ Cipher Suites
Cipher Suite Priv Max
Ending an SOL Session
To use the front panel serial console port on the target blade, end the SOL session.
MPCBL0050 Single Board Computer
[SOL Session operational.
ipmitool lan print 1
# ipmitool -I lanplus -L operator -H <SOL Target IP addr>
# ipmitool -I lanplus -L operator -H <SOL Target IP Addr>
-U solusername -P
-U solusername -P
ipmitool lan print 2
: Set Complete
: NONE MD2 MD5 PASSWORD
: Callback :
: User
: Operator :
: Admin
: OEM
: Unspecified
: 10.90.90.14
: 255.255.255.0
: 00:0e:0c:98:55:6e
:
: TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
: ARP Responses Disabled, Gratuitous ARP Disabled
: 2.0 seconds
: 0.0.0.0
: 00:00:00:00:00:00
: 0.0.0.0
: 00:00:00:00:00:00
: None
: XXXXXXXXXXXXXXX
:
:
:
:
:
to display configuration for the 1st eth channel (this
X=Cipher Suite Unused
c=CALLBACK
u=USER
o=OPERATOR
a=ADMIN
Use ~? for help]
soluserpassword sol activate
soluserpassword sol info
:
:
:
to display configuration for the 2nd eth channel
ping
MPCBL0050—Serial Over LAN
the target blade.
Order Number: 318146-001
September 2007