MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 153

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

EFI BIOS Setup—MPCBL0050
Table 61.
7.5.1
Table 62.
Note:
September 2007
Order Number: 318146-001
Server Management options (Sheet 2 of 2)
Fabric Interface Ports Options Submenu
To access this submenu, select Advanced on the menu bar, then Fabric Interface
Ports Options Options submenu. The Fabric Interface Ports Options options are
presented in
Fabric Interface Ports Options submenu options
The settings are applied only after board reset for this option.
FRB-2 Enable
O/S Boot Watchdog
Timer
O/S Boot Watchdog
Timer Policy
O/S Boot Watchdog
Timer Timeout
Fabric Interface
Ports Options
System Information
Console Redirection
Ports C/D redirection
Ports E/F redirection
Feature
Feature
Table
Enabled/Disabled
Enabled/Disabled
Power Off/Reset
5 minutes
10 minutes
15 minutes
20 minutes
Select to display
submenu
Select to display
submenu
Select to display
submenu
62.
Options
To RTM
To Backplane
Both to Front Panel (FP)
Both to RTM
To backplane
Port 1 to FP Port 2 to RTM
Port 1 to RTM, Port2 to FP
Options
Fault Resilient Boot (FRB).
EFI BIOS programs the BMC watchdog timer for approximately
6 minutes. If EFI BIOS does not complete POST before the
timer expires, the BMC will reset the system.
EFI BIOS programs the watchdog timer with the timeout value
selected. If the OS does not complete booting before the timer
expires, the BMC will reset the system and an error will be
logged. When booting next time EFI BIOS will try booting from
subsequent device on the booting list. Refer to
“Progressive Boot Mechanism” on page 144
Note: Requires OS support or Intel Management Software
If the OS watchdog timer is enabled, this is the system action
taken if the watchdog timer expires.
[Reset] - System performs a reset.
[Power Off] - System powers off.
If the OS watchdog timer is enabled, this is the timeout value
EFI BIOS will use to configure the watchdog timer.
Configures Fabric Interface ports routing
Displays System Information
View/Configure console redirection information and settings.
Intel NetStructure
Configures routing of Gigabit Ethernet ports C
and D.
Configures routing of Gigabit Ethernet ports E
and F
1. Note: When ports C/D are
redirected to the RTM,
AdvancedMC GbE ports will be
automatically connected to the
Backplane.
Description
®
MPCBL0050 Single Board Computer
Description
Technical Product Specification
for details.
Section 6.11.1,
153