MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 181

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Firmware Update Utilities—MPCBL0050
Note:
10.2.4.2
Caution:
10.2.5
Table 72.
10.2.6
September 2007
Order Number: 318146-001
BIOS.bin is a generic file name used here to illustrate the command line used to
perform the operation. You may wish to use a filename that reflects the BIOS version
(for example, EFI_BIOS_XXXXXX.bin) instead of BIOS.cap.
Saving BIOS.bin to the SBC
To ensure that the BIOS.bin file is not corrupted, Intel strongly suggests performing
these steps before major deployment of any SBCs running in a live network
environment.
EFI BIOS Update Utility Command Line Options
Table 72
BIOS flash utility.
Flashdos utility command line options
EFI BIOS Update Utility error codes
Table 73
Command Line Parameter
-b [option] bios_image
where possible [option] values are:
-z : do not clear the CMOS
-zc : update the CMOS from image
-i [bios_image]
-r [options] bin_image
where possible [option] values are:
-aAddress :physical address in hex
-pPage :page number in decimal
-sSize :image size in decimal
-m
-bc cmos_image
-rc cmos_image
-q
Note:
2. Issue the
1. Copy the flashlnx utility and
2. Execute
3. Execute
4. Upon completion, perform a reset to ensure that the new settings and BIOS are
BIOS with the customized settings to the same directory from which the flashlnx
utility is executed. All user preferred settings (including the BIOS image) are saved
in the file named BIOS.bin.
loaded.
The command line parameters shown reflect flashdos usage, where command line options use the “/”
symbol. When using flashlnx, replace “/” with “-”.
lists the command line parameter switches and features supported by the
lists error codes flashlnx utility may return in case of update failure.
chmod +x flashlnx
./flashlnx -b -zc BIOS.cap
flashlnx -r -affe00000 -s2097152 BIOS.cap
BIOS.cap
to change the file attribute to an executable form.
Description
Program a EFI BIOS image to primary fimware hub (FWH0)
Display EFI BIOS system information
Read the flash image and store to a file
Mirror image where all the operational codes and CMOS settings
are copied from FWH0 to FHW1 (redundant BIOS flash device)
Backup current CMOS settings to a file
Restore CMOS settings from a file
Force non-interactive mode (assumes “yes” for all prompts)
Intel NetStructure
to the SBC Linux.
to load the
®
BIOS.cap
MPCBL0050 Single Board Computer
Technical Product Specification
command to copy
file to the FWH0.
181