MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 168

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

9.7
9.7.1
9.7.2
9.7.3
9.7.4
Intel NetStructure
Technical Product Specification
168
®
Reference Script (reference_cfg)
SOL Configuration Reference Script (reference_cfg)
The reference script can run with no special setup. The script uses built-in
commands as well as
have
include
The reference script is implemented as two separate bash files: reference_cfg, which
contains the necessary IPMI commands, and
functions. When reference_cfg runs, it looks for the library in the following paths in the
order listed:
If reference_cfg cannot find the library in any of these locations, it terminates with an
error message.
When running the reference script on a remote node over RMCP via a shelf manager,
RMCP to IPMB bridging must be enabled on the shelf manager. In the case of the Intel
NetStructure
command enables RMCP:
RMCP and KCS communication requires the OpenIPMI application library, version 1.4 or
later. KCS communication further requires the OpenIPMI driver.
Default Behavior
To configure a blade for SOL communications, many items need configuration (for
example, user information, channel parameters, LAN parameters and SOL
parameters). Most of the values used for configuration appear as hard-coded default
values.
SOL User Information
SBCs from Intel implement four different users, User1 through User4. User1 has a null
username which is not editable. The script configures User2 as specifically enabled for
SOL payloads.
The user name is “solusername”, zero-padded to a length of 16 bytes as per the IPMI
2.0 specification. The password is “soluserpassword”, zero-padded to 20 bytes as per
the IPMI 2.0 extension.
LAN Parameters
The reference script configures IPMI channel one. The IPMI channel number used by
reference_cfg can be changed to any IPMI LAN channel supported by the target SBC.
The configured channel must be a base interface, not a fabric interface. On the
MPCBL0050 SBC, IPMC channel 1 corresponds to the Ethernet interface eth4.
Since reference_cfg uses IPMI channel one, this means that, for any SBC, eth0 is
routed to a switch in slot seven (this may vary on different chassis implementations).
1. the current working directory
2. /usr/lib/sbcutils
3. /home/scripts
MPCBL0050 Single Board Computer
# cmmset -d rmcpenable -v 1
bash
grep
installed at
®
and
MPCMM0001/0002 Chassis Management Module, the following
awk
grep
in the path.
/bin/bash
and
awk
(or a symbolic link at that location), and must
. The environment in which the script runs must
reference_func
MPCBL0050—Serial Over LAN
, a library of supporting
Order Number: 318146-001
September 2007
bash