MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 187

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Firmware Update Utilities—MPCBL0050
Figure 45.
Warning:
September 2007
Order Number: 318146-001
Changing CPU crystal frequency
Make sure that you have done step 9, and selected the User BootFlash option. The
common mistake is not to check this option which leads to IPMC image corruption,
10. Right-click the MPCBL0050_BB_XXX.mot filename again and choose Download
11. After the boot block updates successfully, confirm matching checksums by right
12. Exit the program.
13. Eject blade or power down (including standby power) the SBC.
14. Change the DIP switches to default position - ALL OFF
7. Under the Project menu, right-click the project name and choose Add Files.
8. Add the file MPCBL0050_BB_XXX.mot (IPMC bootloader)
9. Right-click the MPCBL0050_BB_XXX.mot filename and choose User Boot Flash.
d. In the Device Settings window, change the CPU crystal frequency to 32 MHz.
e. Use the defaults for the remaining device settings.
f.
File to [User Boot Flash].
The following text (or similar) should appear at the bottom of the screen after
successful completion of the update procedure:
clicking on the filename “MPCBL0050_BB_XXX.mot” , then “Compare File-> Device
Checksum”. Verify the checksum of the file matches the checksum of the device.
Loaded the Write operation module
Writing image to device... [0x00000000 - 0x000009FF]
Writing image to device... [0x00001F80 - 0x00001FFF]
Data programmed at the following positions:
2.73 K programmed in 1 seconds
Image successfully written to device
0x00000000 - 0x000009FF
0x00001F80 - 0x00001FFF
See
Click Next> until you reach the end of the section.
Figure
45.
Length : 0x00000A00
Length : 0x00000080
Intel NetStructure
®
MPCBL0050 Single Board Computer
Technical Product Specification
187