MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 235

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Specifications—MPCBL0050
11.3
11.3.1
Table 82.
11.3.1.1
11.3.1.2
11.3.1.3
September 2007
Order Number: 318146-001
Reliability Specifications
Mean Time Between Failure (MTBF) Specifications
Calculation Type:
Standard:
Methods:
The calculation results were generated using the references and assumptions listed.
This report and its associated calculations supersede all other released Mean Time
Between Failures (MTBF) and Failure in Time (FIT) calculations of earlier report dates.
The reported failure rates do not represent catastrophic failure. Catastrophic failure
rates will vary based on application environment and features critical to the intended
function.
Reliability estimate data
Environmental Assumptions
General Assumptions
General Notes
Where available, direct component supplier predictions or actual FIT rates have been
used.
The SBC MTBF does not include addition of the AMCs, hard drives or memory. Please
contact the manufacturer for specific component and relevant operational MTBF
information.
Failure Rate (FIT)
MTBF
Note:
• Failure rates are based on a 40
• Applied component stress levels are 50% (voltage, current, and/or power).
• Ground, fixed, controlled environment with an environmental adjustment factor
• Component failure rates are constant.
• Board-to-system interconnects included within estimates.
• Non-electrical components (screws, mechanical latches, labels, covers, etc.) are
• Printed circuit board is considered to have a 0 FIT rate.
• Method I, Case I = Based on parts count. Equipment failure is estimated by totaling
• Quality Level II = Devices purchased to specifications, qualified devices, vendor lot-
equal to 1.0.
not included within estimations.
device failures rates and quantities used.
to-lot controls for AQLs and DPMs.
The MTBF data is calculated without AdvancedMC and
DIMMs installed.
MTBF/FIT Rate
Telcordia* Standard SR-332 Issue 1
Method I, Case I, Quality Level II
11,772 failures in 10
84,947 hours
°
C ambient temperature.
9
hours
Intel NetStructure
®
MPCBL0050 Single Board Computer
Technical Product Specification
235