W83627SF-AW Winbond, W83627SF-AW Datasheet - Page 100

• Manufacturer Part Number: W83627SF-AW
• Manufacturer: Winbond

Specifications of W83627SF-AW

• Pin Count: 128
• Lead Free Status / RoHS Status: Not Compliant

CRF3 (SUSLED mode register. Default 0x00)
CRF4 (GP40-GP42 I/O selection register. Default 0x00 Bit 7 - 3: Reserved)
When set to a '1', respective GPIO port is programmed as an input port.
When set to a '0', respective GPIO port is programmed as an output port.
CRF5 (GP40-GP42 data register. Default 0x00 Bit 7 - 3: Reserved)
If a port is programmed to be an output port, then its respective bit can be read/written.
If a port is programmed to be an input port, then its respective bit can only be read.
CRF6 (GP40-GP42 inversion register. Default 0x00 Bit 7 - 3: Reserved)
When set to a '1', the incoming/outgoing port value is inverted.
When set to a '0', the incoming/outgoing port value is the same as in data register.
15.11 Logical Device A (ACPI)
CR30 (Default 0x00)
CR70 (Default 0x00)
CRE0 (Default 0x00)
Bit 7 - 6 : select Suspend LED mode
Bit 5 - 0 : Reserved.
Bit 7 - 1 : Reserved.
Bit 0
Bit 7 - 4 : Reserved.
Bit 3 - 0 : These bits select IRQ resources for PME .
Bit 7
Bit 6
Bit 5
Bit 4
= 00
= 01
= 10
= 11
= 1 Activates the logical device.
= 0 Logical device is inactive.
: DIS-PANSW_IN. Disable panel switch input to turn system power supply on.
= 0PANSW_IN is wire-ANDed and connected to PANSW_OUT.
= 1PANSW_IN is blocked and can not affect PANSW_OUT.
: ENKBWAKEUP. Enable keyboard to wake up system through PANSW_OUT.
= 0Disable Keyboard wake-up function.
= 1Enable Keyboard wake-up function.
: ENMSWAKEUP. Enable Mouse to wake-up system via PANSW_OUT.
= 0Disable Mouse wake-up function.
= 1Enable Mouse wake-up function.
: MSRKEY. Select Mouse Left/Right Button to wake-up system via PANSW_OUT.
= 0Select click on Mouse Left-button twice to wake the system up.
= 1Select click on Mouse right-button twice to wake the system up.
Suspend LED pin is drived low.
Suspend LED pin is tri-stated.
Suspend LED pin is a 1 Hz toggle pulse with 50 duty cycle.
Suspend LED pin is a ¼ Hz toggle pulse with 50 duty cycle.
-100-
W83627SF