HD6417750RF200DV Renesas Electronics America, HD6417750RF200DV Datasheet - Page 652

• Manufacturer Part Number: HD6417750RF200DV
• Description: MPU 1.5/3.3V 0K I-TEMP PB-FREE 2
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417750RF200DV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 28
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.35 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Section 14 Direct Memory Access Controller (DMAC)
interrupt request (DMAE) is generated. The CPU cannot write 1 to AE. This bit can only be
cleared by writing 0 after reading 1.
Bit 2: AE
0
1
Bit 1—NMI Flag (NMIF): Indicates that NMI has been input. This bit is set regardless of
whether or not the DMAC is operating. If this bit is set during data transfer, transfers on all
channels are suspended. The CPU cannot write 1 to NMIF. This bit can only be cleared by writing
0 after reading 1.
Bit 1: NMIF
0
1
Bit 0—DMAC Master Enable (DME): Enables activation of the entire DMAC. When the DME
bit and the DE bit of the CHCR register for the corresponding channel are set to 1, that channel is
enabled for transfer. If this bit is cleared during data transfer, transfers on all channels are
suspended.
Even if the DME bit has been set, transfer is not enabled when TE is 1 or DE is 0 in CHCR, or
when the NMI or AE bit in DMAOR is 1.
Bit 0: DME
0
1
Rev.7.00 Oct. 10, 2008 Page 566 of 1074
REJ09B0366-0700
Description
Description
No address error, DMA transfer enabled
[Clearing condition]
When 0 is written to AE after reading AE = 1
Address error, DMA transfer disabled
[Setting condition]
When an address error is caused by the DMAC
No NMI input, DMA transfer enabled
[Clearing condition]
When 0 is written to NMIF after reading NMIF = 1
NMI input, DMA transfer disabled
[Setting condition]
When an NMI interrupt is generated
Description
Operation disabled on all channels
Operation enabled on all channels
(Initial value)
(Initial value)
(Initial value)