EP9307-IRZ Cirrus Logic Inc, EP9307-IRZ Datasheet - Page 778

• Manufacturer Part Number: EP9307-IRZ
• Description: IC ARM9 SOC ARM920T 272TFBGA
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9307-IRZ

• Core Size: 16/32-Bit
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, Keypad/Touchscreen, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 272-TFBGA
• Controller Family/series: (ARM9)
• No. Of I/o's: 14
• Ram Memory Size: 32MB
• Cpu Speed: 200MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 1
• Digital Ic Case Style: TFBGA
• Embedded Interface Type: AC97, I2S, SPI, UART, USB
• Rohs Compliant: Yes
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9307A-Z
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1133 - KIT DEVELOPMENT EP9307 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1256

27
27-8
27.2.7.3.1 General Note
27.2.7.3.2 Multi-word DMA
IDE Interface
EP93xx User’s Guide
27.2.7.3 IDE DMA Programming Considerations
This is a general guideline for programming the DMA controller to properly interact with the
IDE controller without receiving malformed data. All cases assume the DMA controller is
capable of burst read or burst write operations. Non-ideal DMA controllers may be able to
avoid wait-states due to less than optimal bus utilization.
Please verify that the DMA controller will ignore DMA requests if it's transfer counter register
has gone to zero. If this is not the case, the DMA controller must be configured to time out
based on the wait-state table in
allowed.
Follow the wait-state number listed in the wait-state table in
word bursts are not allowed.
Note: This is the number of wait states required by the IDE Controller to deassert the DMA
Multi-word DMA Read from IDE Controller:
Controller request line after each word transfer is complete.
Wait States:
Multi-word DMA Write to IDE Controller:
Ultra DMA Read from IDE Controller:
Read
Write
Ultra DMA Write to IDE Controller:
Table 27-3. Wait State Value for the DMA M2M Register Control.PWSC
Operation
Table 27-4. HCLK Cycles to De-assert DMA Request
Multi-Word DMA Request
Copyright 2007 Cirrus Logic
Table 27-3
0
3
HCLK Cycle
0
1
0
1
0
1
2
3
0
1
2
and
Table
AHB write command
DMAide deasserts
AHB read command
AHB read data, DMAide deasserts
AHB write command
Data stored in IDE register
Data stored in FIFO, FIFO status updates
DMAide deasserts
AHB read command
AHB read data, word counter updates
DMAide deasserts
27-4. Quad-word bursts are not
Table 27-3
Ultra DMA Request
Event
1
2
and
Table
27-4. Quad-
DS785UM1