ATtiny5 Atmel Corporation, ATtiny5 Datasheet - Page 109

• Manufacturer Part Number: ATtiny5
• Manufacturer: Atmel Corporation

Specifications of ATtiny5

• Flash (kbytes): 0.5 Kbytes
• Pin Count: 6
• Max. Operating Frequency: 12 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 1
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 4
• Ext Interrupts: 4
• Usb Speed: No
• Usb Interface: No
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 4
• Adc Resolution (bits): 8
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 0.03
• Self Program Memory: NO
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 125
• I/o Supply Class: 1.8 to 5.5
• Operating Voltage (vcc): 1.8 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 1
• Output Compare Channels: 2
• Input Capture Channels: 1
• Pwm Channels: 2
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

15.3
15.3.1
8127E–AVR–11/11
Non-Volatile Memories
Non-Volatile Memory Lock Bits
The ATtiny4/5/9/10 have the following, embedded NVM:
The ATtiny4/5/9/10 provide two Lock Bits, as shown in
Table 15-1.
The Lock Bits can be left unprogrammed ("1") or can be programmed ("0") to obtain the addi-
tional security shown in
command, only.
Table 15-2.
Notes:
• Non-Volatile Memory Lock Bits
• Flash memory with four separate sections
Lock Mode
Lock Bit
NVLB2
NVLB1
1
2
3
1. Program the configuration section bits before programming NVLB1 and NVLB2.
2. "1" means unprogrammed, "0" means programmed
Memory Lock Bits
Lock Bit Byte
Lock Bit Protection Modes
NVLB2
Bit No
1
1
0
7
6
5
4
3
2
1
0
(2)
Table
(1)
Description
Non-Volatile Lock Bit
Non-Volatile Lock Bit
NVLB1
15-2. Lock Bits can be erased to "1" with the Chip Erase
1
0
0
(2)
Protection Type
No Memory Lock feature Enabled
Further Programming of the Flash memory is disabled in
the external programming mode. The configuration
section bits are locked in the external programming
mode
Further programming and verification of the flash is
disabled in the external programming mode. The
configuration section bits are locked in the external
programming mode
Table
15-1.
1 (unprogrammed)
1 (unprogrammed)
Default Value
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
1 (unprogrammed)
ATtiny4/5/9/10
109