MC68HC908JL8 MOTOROLA [Motorola, Inc], MC68HC908JL8 Datasheet - Page 129

• Manufacturer Part Number: MC68HC908JL8
• Description: Motorola reserves the right to make changes without further notice to any products herein
• Manufacturer: MOTOROLA [Motorola, Inc]

9.5 Security
MC68HC908JL8
MOTOROLA
NOTE:
—
Rev. 2.0
A security feature discourages unauthorized reading of FLASH locations
while in monitor mode. The host can bypass the security feature at
monitor mode entry by sending eight security bytes that match the bytes
at locations $FFF6–$FFFD. Locations $FFF6–$FFFD contain user-
defined data.
Do not leave locations $FFF6–$FFFD blank. For security reasons,
program locations $FFF6–$FFFD even if they are not used for vectors.
During monitor mode entry, the MCU waits after the power-on reset for
the host to send the eight security bytes on pin PTB0. If the received
bytes match those at locations $FFF6–$FFFD, the host bypasses the
security feature and can read all FLASH locations and execute code
from FLASH. Security remains bypassed until a power-on reset occurs.
If the reset was not a power-on reset, security remains bypassed and
security code entry is not required. (See
PTB0
V
RST
NOTES:
DD
Freescale Semiconductor, Inc.
1 = Echo delay, 2 bit times
2 = Data return delay, 2 bit times
4 = Wait 1 bit time before sending next byte.
For More Information On This Product,
Go to: www.freescale.com
FROM HOST
FROM MCU
Figure 9-7. Monitor Mode Entry Timing
Monitor ROM (MON)
4096 + 32 ICLK CYCLES
24 BUS CYCLES
1
4
1
Figure
9-7.)
1
Monitor ROM (MON)
2
Technical Data
4
1
Security
129