st92f124 STMicroelectronics, st92f124 Datasheet - Page 118

• Manufacturer Part Number: st92f124
• Description: 8/16-bit Single Voltage Flash Mcu Family With Ram, E3 Tmemulated Eeprom, Can 2.0b And J1850 Blpd
• Manufacturer: STMicroelectronics

ST92F124/F150/F250 - INTERRUPTS
WAKE-UP / INTERRUPT LINES MANAGEMENT UNIT (Cont’d)
WAKE-UP MASK REGISTER HIGH (WUMRH)
R250 - Read/Write
Register Page: 57
Reset Value: 0000 0000 (00h)
Bit 7:0 = WUM[15:8]: Wake-Up Mask bits.
If WUMx is set, an interrupt on channel INTD1
and/or a wake-up event (depending on ID1S and
WKUP-INT bits) are generated if the correspond-
ing WUPx pending bit is set. More precisely, if
WUMx=1 and WUPx=1 then:
– If ID1S=1 and WKUP-INT=1 then an interrupt on
– If ID1S=1 and WKUP-INT=0 only an interrupt on
If WUMx is reset, no wake-up events can be gen-
erated.
118/426
WUM15 WUM14 WUM13 WUM12 WUM11 WUM10 WUM9
9
channel INTD1 and a wake-up event are gener-
ated.
channel INTD1 is generated.
7
WUM8
0
WAKE-UP MASK REGISTER LOW (WUMRL)
R251 - Read/Write
Register Page: 57
Reset Value: 0000 0000 (00h)
Bit 7:0 = WUM[7:0]: Wake-Up Mask bits.
If WUMx is set, an interrupt on channel INTD1
and/or a wake-up event (depending on ID1S and
WKUP-INT bits) are generated if the correspond-
ing WUPx pending bit is set. More precisely, if
WUMx=1 and WUPx=1 then:
– If ID1S=1 and WKUP-INT=1 then an interrupt on
– If ID1S=1 and WKUP-INT=0 only an interrupt on
If WUMx is reset, no wake-up events can be gen-
erated.
WUM7
channel INTD1 and a wake-up event are gener-
ated.
channel INTD1 is generated.
7
WUM6
WUM5
WUM4
WUM3
WUM2
WUM1
WUM0
0