TMPM364F10FG Toshiba, TMPM364F10FG Datasheet - Page 773

• Manufacturer Part Number: TMPM364F10FG
• Manufacturer: Toshiba

Specifications of TMPM364F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

10. The 37th to 40th bytes, transmitted from the target board to the controller, are 0x00, 0x00,
11. The 45th and 46th bytes transmitted are 0x00, 0x00.
12. The 47th to 50th bytes, transmitted from the target board to the controller, indicate the start ad-
13. The 51st to 54th bytes, transmitted from the target board to the controller, indicate the end ad-
14. The 55th to 56th bytes, transmitted from the target board to the controller, indicate the number
15. The 57th to 92nd bytes, transmitted from the target board to the controller, contain informa-
16. The 93rd byte, transmitted from the target board to the controller, is a checksum value for the
17. The 94th byte is the next command code.
0x00 and 0x00. The 41st to 44th bytes, transmitted from the target board to the controller, are
0x00, 0x00, 0x00 and 0x00.
dress of the on-chip flash memory, are 0x00, 0x00, 0x80, and 0x3F.
dress of the on-chip flash memory. Each product has own end address shown below.Starting
from the 51th byte, the following values are transmitted.
of flash blocks available. Each product transmits own number shown below. Starting from the
55th byte, the following values are transmitted.
tion about the flash blocks. Flash blocks of the same size are treated as a group. Information
about the flash blocks indicate the start address of a group, the size of the blocks in that group
(in halfwords) and the number of the blocks in that group. The 57th to 65th bytes are the infor-
mation about the 16-kbyte blocks. The 66th to 74th bytes are the information about the 32-
kbyte blocks. The 75th to 83rd bytes are the information about the 64-kbyte blocks. The 84th
to 92nd bytes are the information about the 128-kbyte blocks. See Table 24-8 for the values of
bytes transmitted.
5th to 92nd bytes. To calculate the checksum value, add all these bytes together, ignore the car-
ries and calculate the 8-bit two’s complement by using lower 8 bits.
TMPM364F10FG
TMPM364F10FG
TMPM364F10FG
Product name
Product name
Product
Page 747
0xFF, 0xFF, 0x8F, 0x3F
0x00, 0x00,0x80, 0x3F
Number of flash blocks
0x0A, 0x00
Address
Address
TMPM364F10FG