TMPM364F10FG Toshiba, TMPM364F10FG Datasheet - Page 389

• Manufacturer Part Number: TMPM364F10FG
• Manufacturer: Toshiba

Specifications of TMPM364F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

12. Serial Channel (SIO/UART)
12.1
12.2
mode), and the other is the asynchronous communication mode (UART mode).
This device has two modes for the serial channel, one is the synchronous communication mode (I/O interface
Their features are described as follows.
In the following explanation, "x" represents channel number.
TMPM364F10FG has 12 channels.
Each channel function is independent. The pins and interrupts for each channel are assigned as follows.
Overview
Difference in the Specification of SIO Modules
・ Transfer Clock
・ Double buffer / FIFO
・ I/O Interface mode
・ UART Mode
-
-
-
-
-
-
-
-
-
-
-
The double buffer function and the FIFO buffers (total of transmit and receive) can be used up to 4bytes.
Generate the transfer clock by dividing the peripheral clock (φT0) frequency into 1/2, 1/8, 1/32, 1/128.
The prescaler output clock frequency can be divided by each of the numbers from 1 to 16.
The prescaler output frequency can be divided by each of the numbers from 1, N+m/16 (N=2-15,
m=1-15), and 16. (only UART mode)
The system clock is usable. (only UART mode)
Transfer Mode : the half duplex (transmit / receive) and the full duplex
Clock : Output (fixed rising edge) / Input (selectable rising / falling edge)
A time interval can be set within a range where continuous transmission is performed.
Data length : 7, 8, 9 bits
Add parity bit (to be against 9 bits data length)
Serial links to use wake-up function
Handshaking function with CTS pin
Page 363
TMPM364F10FG