TMPM364F10FG Toshiba, TMPM364F10FG Datasheet - Page 433

• Manufacturer Part Number: TMPM364F10FG
• Manufacturer: Toshiba

Specifications of TMPM364F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

12.13
pin and to prevent overrun errors. This function can be enabled or disabled by SCxMOD0<CTSE>.
mission is suspended until CTS pin returns to the "Low" level. However in this case, the INTTXx interrupt is gen-
erated in the normal timing, the next transmit data is written in the transmit buffer, and it waits until it is ready to
transmit data.
the port for the RTS function. By setting the port to "High" level upon completion of data reception (in the re-
ceive interrupt routine), the transmit side can be requested to suspend data transmission.
Data write to transmit
buffer or shift register
Note 1: If the CTS signal is set to "High" during transmission, the next data transmission is suspended after
Note 2: Data transmission starts on the first falling edge of the TXDCLK clock after CTS is set to "Low".
The function of the handshake is to enable frame-by-frame data transmission by using the CTS (Clear to send)
When the CTS pin is set to "High" level, the current data transmission can be completed but the next data trans-
Although no RTS pin is provided, a handshake control function can easily implemented by assigning one bit of
Handshake Function
TXDCLK
the current transmission is completed.
SIOCLK
CTS
TXD
a
Transmit side
Transmission is
suspended during
this period.
Figure 12-8 Handshake Function
Figure 12-9 CTS Signal timing
TXD
CTS
13 14 15 16
b
Page 407
1
2
Start bit
RXD
RTS (Any port)
3
Receive side
14 15 16
TMPM364F10FG
1
2
Bit 0
3