ATTINY167-15XD Atmel, ATTINY167-15XD Datasheet - Page 235

• Manufacturer Part Number: ATTINY167-15XD
• Description: MCU AVR 16K FLASH 15MHZ 20-TSSOP
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY167-15XD

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USI
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 16
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 150°C
• Package / Case: 20-TSSOP
• Processor Series: ATTINY1x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Maximum Clock Frequency: 16 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• For Use With: ATSTK600-SOIC - STK600 SOCKET/ADAPTER FOR SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

21.7.6
21.7.7
21.7.8
7728G–AVR–06/10
Reading the Flash
Reading the EEPROM
Programming the Fuse Low Bits
PAGEL / BS1
RESET +12V
Figure 21-4. Programming the EEPROM Waveforms
The algorithm for reading the Flash memory is as follows (refer to
page 232
The algorithm for reading the EEPROM memory is as follows (refer to
Flash” on page 232
The algorithm for programming the Fuse Low bits is as follows (refer to
Flash” on page 232
XA1 / BS2
RDY/BSY
1. A: Load Command “0000 0010
2. G: Load Address High Byte (0x00 - 0xFF).
3. B: Load Address Low Byte (0x00 - 0xFF).
4. Set OE to “0”, and BS1 to “0”. The Flash word low byte can now be read at DATA.
5. Set BS1 to “1”. The Flash word high byte can now be read at DATA.
6. Set OE to “1”.
1. A: Load Command “0000 0011
2. G: Load Address High Byte (0x00 - 0xFF).
3. B: Load Address Low Byte (0x00 - 0xFF).
4. Set OE to “0”, and BS1 to “0”. The EEPROM Data byte can now be read at DATA.
5. Set OE to “1”.
1. A: Load Command “0100 0000
2. C: Load Data Low Byte. Bit n = “0” programs and bit n = “1” erases the Fuse bit.
3. Give WR a negative pulse and wait for RDY/BSY to go high.
XTAL1
DATA
XA0
WR
OE
for details on Command and Address loading):
0x11
A
ADDR. HIGH
for details on Command and Address loading):
for details on Command and Data loading):
G
ADDR. LOW
B
DATA
C
b
b
b
”.
”.
”.
XX
E
ADDR. LOW
B
ATtiny87/ATtiny167
DATA
C
K
XX
E
“Programming the Flash” on
L
“Programming the
“Programming the
235