sed1374 ETC-unknow, sed1374 Datasheet - Page 397

• Manufacturer Part Number: sed1374
• Description: Sed1374 Embedded Memory Color Lcd Controller
• Manufacturer: ETC-unknow

EPSON Research and Development
Vancouver Design Center
1 Introduction
1.1 General Description
SDU1374/75-TMPR3912/22U CPU Module
Issue Date: 98/12/23
This manual describes the interface between the SED1374/75 LCD Controller (LCDC) and
the TMPR3912/22U microprocessor as implemented on the Toshiba 3912/22 and
SED1374/75 CPU Module. This module is used in conjunction with the Toshiba TX RISC
Reference Platform.
For more information regarding the SED1374 or SED1375 refer to their respective
Hardware Functional Specification, document number X26A-A-001-xx and
X27A-A-001-xx respectively.
For more information regarding the TMPR3912/22U, refer to the TMPR3912/22U 32-Bit
MIPS RISC Processor User’s Manual. See the Toshiba website under semiconductors at
http://toshiba.com/taec/nonflash/indexproducts.html.
The Toshiba TX RISC Reference Kit consists of 6 boards which include : a main board, a
CPU board, a EPROM board, a FMEM board, a debug board, and an analog board. The
main board acts as the motherboard for all the other add-on boards. In addition to these
boards, there is an LCD module that connects to the CPU board. In order to support the
add-on LCD panel that connects to the LCD module, the CPU board microprocessor must
have an internal LCD controller or the CPU board must have an LCD controller on it that
interfaces to the microprocessor.
For the TMPR3912/22U microprocessor, the SED1374 or SED1375 LCDC is used to
provide support for LCD panels. The LCDC is socketed so that it can be interchanged
between the SED1374 and the SED1375. These controllers are very similar, with the main
differences being the amount of embedded display memory and the lookup-table archi-
tecture (LUT). The SED1374 has 40K bytes of display memory and the SED1375 has 80K
bytes.
The Toshiba TMPR3912/22U processor supports two PC Card (PCMCIA) slots on the TX
RISC Reference Platform. The SED1374 or SED1375 LCD controller uses the PC Card
slot 1 to interface to the TMPR3912/22U, therefore, this slot is unavailable for use on the
TX RISC Reference Platform.
X00A-G-004-01
Page 7