sed1374 ETC-unknow, sed1374 Datasheet - Page 189

• Manufacturer Part Number: sed1374
• Description: Sed1374 Embedded Memory Color Lcd Controller
• Manufacturer: ETC-unknow

Epson Research and Development
Vancouver Design Center
System
1374CFG.EXE Configuration Program
Issue Date: 98/10/27
• Portrait Mode - selecting Portrait Mode causes register settings and timings to be saved
The options in the System section describe the items which are required for frame rate
calculations and where in CPU address space the SED1374 will be located.
• Memory Location - this describes where in CPU address space the SED1374 will be
• Frame Rate - indicate the desired frame rate here. 1374CFG will attempt to write
for portrait mode operation.
The HAL is capable of performing rotations “on the fly”. Most programs written for the
HAL will ignore this setting and set Portrait or Landscape display modes as desired.
This setting is useful when the configuration is saved into a C header file to be used by
non-HAL programs.
located. This setting is required by the HAL to locate the SED1374. If the settings from
1374CFG will be saved to a C header file for use in a non-HAL program this value does
not have to be filled in.
register settings which result in the requested frame rate. If the frame rate cannot be
reached then the following dialog inform the user of the problem
Figure 5: ERROR: Frame Rate
Figure 4: System Options
X26A-B-001-01
SED1374
Page 11