SAM9G45 Atmel Corporation, SAM9G45 Datasheet - Page 259

• Manufacturer Part Number: SAM9G45
• Manufacturer: Atmel Corporation

Specifications of SAM9G45

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 2
• Uart: 5
• Lin: 4
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: Yes
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: DDR2/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

• CAS: CAS Latency
The reset value is 2 cycles.
• DLL: Reset DLL
Reset value is 0.
This field defines the value of Reset DLL.
0 = Disable DLL reset.
1 = Enable DLL reset.
This value is used during the power-up sequence.
Note: This field is found only in DDR1-SDRAM devices.
• DIC/DS: Output Driver Impedance Control:
Reset value is 0.
This field defines the output drive strength.
0 = Normal driver strength.
1 = Weak driver strength.
This value is used during the power-up sequence. This parameter is found in the datasheet as DIC or DS.
Note: This field is found only in DDR2-SDRAM devices.
• DIS_DLL: Disable DLL
0 = Enable DLL
1 = Disable DLL
• OCD: Off-chip Driver
Reset value is 3’b111.
Note: OCD is NOT supported by the controller, but these values MUST be programmed during the initialization sequence.
6438G–ATARM–19-Apr-11
OCD
CAS
000
001
010
011
100
101
110
111
000
111
DDR2 CAS Latency
OCD calibration mode exit, maintain setting
OCD calibration default
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
3
SDR CAS Latency
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
2
3
SAM9G45
259