EP9315-IBZ Cirrus Logic Inc, EP9315-IBZ Datasheet - Page 41

• Manufacturer Part Number: EP9315-IBZ
• Description: 32-Bit Microcontroller IC
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9315-IBZ

• Controller Family/series: (ARM9)
• Core Size: 32 Bit
• A/d Converter: 12 Bits
• Supply Voltage: 3.3V
• No. Of I/o Pins: 65
• Package / Case: 352-PBGA
• Clock Frequency: 200MHz
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, PCMCIA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9315A-Z
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1144 - KIT DEVELOPMENT EP9315 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1263

DS785UM1
2.2.3.1 ARM9TDMI Core
A 16 kbyte instruction and a 16 kbyte data cache are included to increase performance for
cache-enabled memory regions. The 64-way associative cache also has lock-down
capability. A 16-word Write Buffer allows cached instructions to be fetched and decoded while
the Write Buffer sends data to external memory.
The ARM920T Core supports a number of co-processors, including the MaverickCrunch co-
processor by means of a specific pipeline architecture interface.
ARM9TDMI core is responsible for executing both 32-bit ARM and 16-bit Thumb instructions.
Each provides a unique advantage to a system design. Internally, the instructions enter a 5-
stage pipeline. These stages are:
All instructions are fully interlocked. This mechanism will delay the execution stage of a
instruction if data in that instruction comes from a previous instruction that is not available yet.
This simply insures that software will function identically across different implementations.
For memory access instructions, the base register used for the access will be restored by the
ARM Core in the event of an Abort exception. The base register will be restored to the value
contained in it immediately before execution of the instruction.
The ARM9TDMI core memory interface includes a separate instruction and data interface to
allow concurrent access of instructions and data to reduce the number of CPI (cycles per
instruction). Both interfaces use pipeline addressing. The core can operate in big and little
endian mode. Endianess affects both the address and the data interfaces.
The memory interface executes four types of memory transfers: sequential, non-sequential,
internal, and co-processor. It will also support uni- and bi-directional transfer modes.
The core provides a debug interface called JTAG (Joint Testing Action Group). This interface
provides debug capability with five external control signals:
There are six scan chains (0 through 5) in the ARM9TDMI controlled by the JTAG Test
Access Port (TAP) controller. Details on the individual scan chain function and bit order can
be found in the ARM920T Technical Reference Manual.
• Instruction Fetch
• Instruction Decode
• Execute
• Data Memory Access
• Register Write
• TDO - Test Data Out
• TDI - Test Data In
• TMS - Test Mode Select
• TCK - Test Clock
• nTRST - Test Reset
Copyright 2007 Cirrus Logic
ARM920T Core and Advanced High-Speed Bus (AHB)
EP93xx User’s Guide
2-3
2