MC68HC908AS60CFN Freescale Semiconductor, MC68HC908AS60CFN Datasheet - Page 112

• Manufacturer Part Number: MC68HC908AS60CFN
• Description: IC MCU 60K FLASH 8MHZ 52-PLCC
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908AS60CFN

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8.4MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 40
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 15x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 52-PLCC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

EEPROM-2
7.5 Low-Power Modes
7.5.1 Wait Mode
7.5.2 Stop Mode
Technical Data
The WAIT and STOP instructions can put the MCU in low
power-consumption standby modes.
The WAIT instruction does not affect the EEPROM. It is possible to
program the EEPROM and put the MCU in wait mode. However, if the
EEPROM is inactive, power can be reduced by setting the EEOFF bit
before executing the WAIT instruction.
The STOP instruction reduces the EEPROM power consumption to a
minimum. The STOP instruction should not be executed while the high
voltage is turned on (EEPGM = 1).
If stop mode is entered while program/erase is in progress, high voltage
will be automatically turned off. However, the EEPGM bit will remain set.
When stop mode is terminated, and if EEPGM is still set, the high voltage
will be automatically turned back on. Program/erase time will need to be
extended if program/erase is interrupted by entering stop mode.
The module requires a recovery time, t
stop mode. Attempts to access the array during the recovery time will
result in unpredictable behavior.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
EEPROM-2
EESTOP
, to stabilize after leaving
MC68HC908AS60 — Rev. 1.0