UPD70F3765GF-GAT-AX Renesas Electronics America, UPD70F3765GF-GAT-AX Datasheet - Page 972

• Manufacturer Part Number: UPD70F3765GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3765GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
(21) CAN0 message configuration register m (C0MCONFm)
Remark A remote frame is received and stored, regardless of the setting of the OWS and DN bits. A remote
Note
Note
The C0MCONFm register is used to specify the type of the message buffer and to set a mask.
After reset: Undefined
C0MCONFm
OWS
MT2
RTR
0
0
0
0
1
1
0
1
0
1
The “message buffer that has already received a data frame” is a receive message buffer whose the
C0MCTRLm.DN bit has been set to 1.
The RTR bit specifies the type of message frame that is transmitted from a message buffer defined as a
transmit message buffer. Even if a valid remote frame has been received, the RTR bit of the transmit
message buffer that has received the frame remains cleared to 0. Even if a remote frame whose ID
matches has been received from the CAN bus with the RTR bit of the transmit message buffer set to 1
to transmit a remote frame, that remote frame is not received or stored (interrupt generated, DN flag set,
the MDLC0 to MDLC3 bits updated, and recorded to the receive history list).
Other than above
frame that satisfies the other conditions (ID matches, the RTR bit = 0, the C0MCTRLm.TRQ bit = 0) is
always received and stored in the corresponding message buffer (interrupt generated, DN flag set,
the C0MDLCm.MDLC0 to C0MDLCm.MDLC3 bits updated, and recorded to the receive history list).
The message buffer
data frame. The newly received data frame is discarded.
The message buffer that has already received a data frame is overwritten by a newly received data
frame.
Transmit a data frame.
Transmit a remote frame.
MT1
0
0
1
1
0
0
OWS
7
R/W
MT0
0
1
0
1
0
1
RTR
Note
6
that has already received a data frame is not overwritten by a newly received
Address: See Table 20-16.
Transmit message buffer
Receive message buffer (no mask setting)
Receive message buffer (mask 1 set)
Receive message buffer (mask 2 set)
Receive message buffer (mask 3 set)
Receive message buffer (mask 4 set)
Setting prohibited
MT2
5
Remote frame request bit
Overwrite control bit
MT1
4
Message buffer type setting bit
MT0
3
Note
CHAPTER 20 CAN CONTROLLER
2
0
1
0
Page 972 of 1509
MA0
0
(1/2)