UPD70F3765GF-GAT-AX Renesas Electronics America, UPD70F3765GF-GAT-AX Datasheet - Page 793

• Manufacturer Part Number: UPD70F3765GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3765GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
(2) Operation timing
SIFn pin capture
INTCFnR signal
CFnSCE bit
CFnTSF bit
SCKFn pin
SOFn pin
SIFn pin
(7) When the CFnCTL0.CFnSCE bit = 1 upon communication completion, the next communication is
(8) To end continuous reception with the current reception, write the CFnSCE bit = 0.
(9) Read the CFnRX register.
(10) When reception is completed, the INTCFnR signal is generated, and reading of the CFnRX register is
(11) Read the CFnRX register.
(12) If an overrun error occurs, write the CFnSTR.CFnOVE bit = 0, and clear the error flag.
(13) To release the reception enable status, write CFnCTL0.CFnPWR bit = 0 and CFnCTL0.CFnRXE bit =
Remark
(1) Write 00H to the CFnCTL1 register, and select communication type 1, communication clock (f
(2) Write 00H to the CFnCTL2 register, and set the transfer data length to 8 bits.
(3) Write A3H to the CFnCTL0 register, and select the reception mode, MSB first, and continuous transfer
(4) Set the CFnSTR.CFnTSF bit to 1 by performing a dummy read of the CFnRX register, and start
(5) When reception is started, output the serial clock to the SCKFn pin, and capture the receive data of the
(6) When reception is completed, the reception completion interrupt request signal (INTCFnR) is
timing
f
mode at the same time as enabling the operation of the communication clock (f
reception.
SIFn pin in synchronization with the serial clock.
generated, and reading of the CFnRX register is enabled.
started following communication completion.
enabled. When the CFnSCE bit = 0 is set before communication completion, stop the serial clock
output to the SCKFn pin, and clear the CFnTSF bit to 0, to end the receive operation.
0 after checking that the CFnTSF bit = 0.
XX
L
/2, and master mode.
(1)
(2)
(3)
n = 0 to 4
(4)
(5)
Bit 7 Bit 6
Bit 5 Bit 4
Bit 3 Bit 2
CHAPTER 18 3-WIRE VARIABLE-LENGTH SERIAL I/O (CSIF)
Bit 1
(6) (7) (8) (9)
Bit 0
Bit 7 Bit 6
Bit 5 Bit 4
Bit 3 Bit 2
Bit 1
(10)
Bit 0
CCLK
).
(11) (13)
Page 793 of 1509
CCLK
) =