DF2148RTE20IV Renesas Electronics America, DF2148RTE20IV Datasheet - Page 375

• Manufacturer Part Number: DF2148RTE20IV
• Description: MCU 5V 128K I-TEMP,PB-FREE, 100-
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148RTE20IV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: Host Interface, I²C, IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

When ICRC or ICRD is used as a buffer register, its input capture flag is set by the selected
transition of its input capture signal. For example, if ICRC is used to buffer ICRA, when the edge
transition selected by the IEDGC bit occurs on the FTIC input capture line, ICFC will be set, and
if the ICIEC bit is set, an interrupt will be requested. The FRC value will not be transferred to
ICRC, however.
In buffered input capture, if the upper byte of either of the two registers to which data will be
transferred (ICRA and ICRC, or ICRB and ICRD) is being read when the input signal arrives,
input capture is delayed by one system clock ( ) period. Figure 11.10 shows the timing when
BUFEA = 1.
11.3.5
The input capture flag ICFx (x = A, B, C, D) is set to 1 by the internal input capture signal. The
FRC value is simultaneously transferred to the corresponding input capture register (ICRx). Figure
11.11 shows the timing of this operation.
FTIA
Input capture
signal
Timing of Input Capture Flag (ICF) Setting
CPU reads ICRA or ICRC
(Input Capture Input when ICRA or ICRC Is Read)
Figure 11.10 Buffered Input Capture Timing
Read cycle:
T
1
T
2
Rev. 4.00 Sep 27, 2006 page 329 of 1130
Section 11 16-Bit Free-Running Timer
REJ09B0327-0400