dsp56800eerm Freescale Semiconductor, Inc, dsp56800eerm Datasheet - Page 111

no-image

dsp56800eerm

Manufacturer Part Number
dsp56800eerm
Description
16-bit Digital Signal Controllers
Manufacturer
Freescale Semiconductor, Inc
Datasheet
6.5.2.1
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.2.2
When 1, this bit indicates that the previous reset occurred as a result of a software reset (write to SW RST
bit in the SIM_CONTROL register). This bit will be cleared by any hardware reset or by software. Writing
a 0 to this bit position will set the bit, while writing a 1 to the bit will clear it.
6.5.2.3
When 1, the COPR bit indicates the Computer Operating Properly (COP) timer-generated reset has
occurred. This bit will be cleared by a Power-On Reset or by software. Writing a 0 to this bit position will
set the bit, while writing a 1 to the bit will clear it.
6.5.2.4
If 1, the EXTR bit indicates an external system reset has occurred. This bit will be cleared by a Power-On
Reset or by software. Writing a 0 to this bit position will set the bit, while writing a 1 to the bit position
will clear it. Basically, when the EXTR bit is 1, the previous system reset was caused by the external
RESET pin being asserted low.
6.5.2.5
When 1, the POR bit indicates a Power-On Reset occurred some time in the past. This bit can be cleared
only by software or by another type of reset. Writing a 0 to this bit will set the bit while writing a 1 to the
bit position will clear the bit. In summary, if the bit is 1, the previous system reset was due to a Power-On
Reset.
6.5.2.6
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.3
Only SIM_SCR0 is shown below. SIM_SCR1, SIM_SCR2, and SIM_SCR3 are identical in functionality.
Freescale Semiconductor
Preliminary
Base + $2
Read
Write
POR
SIM Software Control Registers (SIM_SCR0, SIM_SCR1, SIM_SCR2,
and SIM_SCR3)
Reserved—Bits 15–6
Software Reset (SWR)—Bit 5
COP Reset (COPR)—Bit 4
External Reset (EXTR)—Bit 3
Power-On Reset (POR)—Bit 2
Reserved—Bits 1–0
15
0
Figure 6-5 SIM Software Control Register 0 (SIM_SCR0)
14
0
13
0
12
0
56F8357 Technical Data, Rev. 15
11
0
10
0
9
0
FIELD
8
0
7
0
6
0
5
0
4
0
3
0
2
0
Register Descriptions
1
0
0
0
111

Related parts for dsp56800eerm