CV500BI111 Omron, CV500BI111 Datasheet - Page 99

• Manufacturer Part Number: CV500BI111
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BI111

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Power Supply Specifications
Laying Optical Cable (CS1W-RPT02/03 Only)
Connection Procedure
74
Wiring
1,2,3...
Note
8. Do not place any object on the power cable.
9. Check that connectors are correctly attached before using the Unit.
The power supply to the Repeater Unit must meet the following specifications.
The following Power Supply Unit is recommended:
Optical fiber cable (H-PCF or GI) can be used to create an optical connection
in part of a wired network.
CS1W-RPT02 (H-PCF)
1. Always use the specified Optical Fiber Cables.
2. The maximum distance between nodes depends on how the cable is con-
Use the following procedure to connect Optical Fiber Cables to a Unit.
1. Tighten screws in the mounting brackets so that the through-holes on the
2. Insert bushing to the mounting bracket and secure the Unit with screws.
3. Pass the tension member through the through-holes, and tighten the ter-
4. Affix the cable to the mounting bracket so that it is clamped by the bracket.
Wired Controller
Link Unit
Power supply volt-
age
Allowable power
supply voltage
range
Current consump-
tion
Inrush current
OMRON S82K Series
nected. For details, refer to the applicable Optical Fiber Cable (H-PCF)
manual.
terminal are on the top and bottom and then affix hexagonal nuts from the
opposite side of the terminal.
minal screws to affix the tension member.
Item
CS1W-RPT02
Repeater Unit
24 V DC
20.4 to 26.4 V DC (24 V DC, −15% to 10%)
24 V DC at 60 mA
max.
2.5 A max. (24 V DC with rise time 5 ms)
Repeater Unit
CS1W-RPT01
Wire-to-Wire
SL1
SL2
H-PCF cable
24 V DC at 60 mA
max.
PCF) Repeater Unit
Wire-to-Optical (H-
CS1W-RPT02
CS1W-RPT02
Repeater Unit
SL1
SL2
24 V DC at 70 mA
max.
Wire-to-Optical (GI)
Repeater Unit
CS1W-RPT03
Wired Controller
Link Unit
Section 3-3