CV500BI111 Omron, CV500BI111 Datasheet - Page 148

• Manufacturer Part Number: CV500BI111
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BI111

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Setting Data Links
First data link sta-
tus word
Area 1 Data link
Area 2 Data link
Setting item
Note a) The total number of words in data link send and receive areas
start word
Number of
words
Offset
start word
Number of
words
Offset
b) The following values must be satisfied for each node for the data
must not exceed 8,000 per node.
link area 1 and area 2 so that the final word in the data link does
not go beyond the last word in the PLC memory area.
Set the first word to store data link status. An area of 16 words is
used.
IR Area:
LR Area:
DM Area: DM 0000 to DM 5984
EM Area: EM 0000 to EM 6128 (EM must be installed)
When IR 000 is specified or when the default setting (
left unchanged, the default first status word will be used. Refer
to 5-4 Checking Data Link Status for details.
IR Area:
LR Area:
DM Area: DM 0000 to DM 5999
EM Area: EM 0000 to EM 6143 (EM must be installed)
The same memory area cannot be set for both area 1 and area
2. Set different memory areas.
Remote nodes: 0 to the number of source words
Local node:
The total number of words in area 1 and area 2 in each node
must not exceed 1,000.
The numbers of words in both area 1 and area 2 in each node
must not be set to 0.
Remote nodes: 0 to one less than number of source words
Local node:
This setting is not required if an offset is not used.
IR Area:
LR Area:
DM Area: DM 0000 to DM 5999
EM Area: EM 0000 to EM 6143 (EM must be installed)
The same memory area cannot be set for both area 1 and area
2. Set different memory areas.
Remote nodes: 0 to the number of source words
Local node:
The total number of words in area 1 and area 2 in each node
must not exceed 1,000.
The numbers of words in both area 1 and area 2 in each node
must not be set to 0.
Remote nodes: 0 to one less than number of source words
Local node:
This setting is not required if an offset is not used.
IR 001 to IR 232
LR 00 to LR 48
IR 000 to IR 247
LR 00 to LR 63
IR 000 to IR 247
LR 00 to LR 63
Set the number of words to be received.
0 to 1,000
Set the number of words to be transmitted.
Set the offset for the data to be received.
Cannot be set.
Set the number of words to be received.
0 to 1,000
Set the number of words to be transmitted.
Set the offset for the data to be received.
Cannot be set.
Setting range
Section 5-2
–––––
123
) is