CV500BI111 Omron, CV500BI111 Datasheet - Page 86

• Manufacturer Part Number: CV500BI111
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BI111

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Unit Installation
3-2-1
C200HX/HG/HE PLCs
CPU Backplane
CPU Backplane
Mounting Controller Link Units
Controller Link Unit
Note Tighten the screws on the Backplane to a torque of 1.2 N • m.
Controller Link Unit
Controller Link Unit
CPU Unit
CPU Unit
2. Be sure that all screws on the Backplane, the Bus Connection Unit, the ter-
3. A label has been placed over the upper surface of the Controller Link Unit
4. Remove the label after wiring and installing the Controller Link Unit to pre-
Up to two C200HX/HG/HE Controller Link Units can be mounted on the CPU
Rack. Controller Link Units cannot be mounted to an Expansion I/O Rack or a
Slave Rack.
Tighten the screws on the Bus Connection Unit to a torque of 0.4 N • m.
Installing One Controller Link Unit
Mount the Unit in the slot on the left of the CPU Unit.
Installing Two Controller Link Units
Mount the Units in the two slots on the left of the CPU Unit.
C200HW-CE001 Bus Connection Unit
(For one Unit)
C200HW-CE002 Bus Connection Unit
(For two Units)
minal block, and cables are tightened firmly. If screws work loose, a mal-
function may occur as a result of vibration.
to prevent scraps of wire from entering the Unit. Conduct wiring and instal-
lation with this label in place. If wire scraps get into the Unit, it will malfunc-
tion.
vent overheating. Overheating will cause the Unit to malfunction.
C200HW-CLK21
Controller Link Unit
C200HW-CLK21
Controller Link Unit
CPU Unit
(C200HE-CPU32/42-(Z)E
C200HG-CPU33/43/53/63-(Z)E
C200HX-CPU34/44/54/64-(Z)E
C200HW-COM01/04
Communications Board
CPU Unit
(C200HE-CPU32/42-(Z)E
C200HG-CPU33/43/53/63-(Z)E
C200HX-CPU34/44/54/64-(Z)E
C200HW-COM01/04
Communications Board
Section 3-2
61