CV500BI111 Omron, CV500BI111 Datasheet - Page 104

• Manufacturer Part Number: CV500BI111
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BI111

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Wiring
Numerical Aper-
ture (N.A.)
Transmission
loss
Connection loss ---
Transmission
bandwidth
Item
---
---
500
Minimum
0.21
---
---
---
Standard
4. Turn the cable connector so that the tab in the connector faces left and
5. After installing the Optical Fiber Cable, fix the tension member of the Opti-
When installing Optical Fiber Cables, be sure to stay within the specifications
(e.g., tensile strength, bending, lateral pressure) for the cables used.
Optical Fiber Cables
Use Optical Fiber Cables (Graded Index: GI) with the following optical specifi-
cations.
50/125 µ m AGF Cable
Align the tab in the cable connector with
the slot in the Unit's connector and fully
insert the cable connector.
Remove the covers from the tips of the cables’ ST connectors if there are
covers protecting the ST connectors.
Note To replace the Optical Connector Cover, just reverse the steps shown
aligns with the slot in the Unit’s connector. Insert the cable connector fully
into the Unit’s optical connector. Press and turn the cable’s connector
clockwise to lock the connector in place.
Note To remove the connector, just reverse the steps shown in the diagram
cal Fiber Cable.
Insert the connectors completely and always check that the connectors are
locked before starting operation.
Slot
Unit's optical
connector
Optical Connector Cover
in the diagram above.
above. (Press and turn the cable connector’s metal fitting counter-
clockwise to unlock the connector.)
---
3.0 Lf
3.0 Lf + 0.2
3.0 Lf + 0.4
1.0
---
Maximum
Tab
Cable
connector
---
dB
MHz⋅km
Rotate the cover 90°
counterclockwise.
Unit
0.2 km ≤ Lf < 0.5 km
Lf < 0.2 km
λ = 0.8 µm, one location
λ = 0.85 µm (LD)
Theoretical value
0.5 km ≤ Lf
Press and turn the metal fitting on
the cable connector until it locks.
Pull off the cover.
Conditions
λ = 0.8 µm
T
a
= 25°C
Section 3-3
79