CV500BI111 Omron, CV500BI111 Datasheet - Page 49

• Manufacturer Part Number: CV500BI111
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500BI111

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Controller Link Support Software (Version 2.00)
Using an Independent
Computer
24
Specifications and Configurations
IBM PC/AT or
compatible
Setting data link tables
Note
+
Controller Link
Support Software
2. Use the CX-Integrator Data Link Setting Tool version 3.2.1.1 or later to set
3. For automatic data link creation with 1:N allocations or when changing
The Controller Link Support Software can be used to manually set data links,
to set Controller Link parameters, and to monitor the Controller Link Network.
The Controller Link Support Software is run on a personal computer con-
nected to a C200HX/HG/HE, CVM1, or CV-series PLC or a personal com-
puter in which a Controller Link Support Board has been mounted.
A computer that is not part of the Network can be used to control the Control-
ler Link Network.
1. The Controller Link Support Software cannot be connected to a CS/CJ-se-
2. The Controller Link Support Software can be used as a part of the SYS-
• Setting the data link mode to “manual” (creating and storing data link
• Starting/stopping data links.
• Reading (monitoring) network status.
• Reading error logs.
• Setting routing tables.
• Testing the Network.
• Changing network parameters.
• Reading the network connection configuration data and status (in token-
data link tables with more than 1,000 send words per node.
For information on checking the version number, refer to Checking the CX-
Integrator Data Link Setting Tool Version on page viii.
data link tables while the data link is active (CS1W-CLK23/CLK21-V1 and
CJ1W-CLK23/CLK21-V1), use the CX-Net in CX-Programmer version 3.2
or higher.
tables).
ring mode only).
ries PLC. It is possible to monitor and set a Controller Link Unit on a CS/
CJ-series via the network by connecting the computer running the Control-
ler Link Support Software to a C200HX/HG/HE, CVM1, CV-series, or
CQM1H-series PLC.
MAC Support Software.
Transmissions
RS-232C
RS-232C
Nodes
Nodes
C200HX/HG/HE,
CVM1, and CV-series
PLCs
CS-series PLCs
C200HX/HG/HE and
CQM1H-series PLCs
Controller
Link Unit
CPU Unit
Controller
Link Unit
CPU Unit
CS-series PLC
Nodes
CVM1 and CV-series PLCs
CPU Unit
Controller
Link Unit
Section 1-2